Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena
Juanvmont·Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena-PCB·Trx_antena_pcb/Trx_antena_pcb.kicad_pcb
About the Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena PCB
Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena is an open source PCB design by Juanvmont, published on GitHub. It is a 2-layer board measuring 41 × 70.5 mm, with 47 components from 31 distinct parts.
Other key parts include the CC2520, CC2591 and INV_F_ANT. By type, the board carries 16 capacitors, 10 inductors, 10 resistors, 2 ICs, 2 connectors and 1 module.
It belongs with the iot & wireless and rf & radio designs in this gallery.
From the project
Este circuito de poncho implementa una unidad de radio que opera en la banda de frecuencias abierta de 2.4GHz y compila con aplicaciones de la EDU-CIAA NXP que soportan el estándar IEEE 802.15.4: IEEE Standards Association. IEEE Standard for Local and metropolitan area networks–Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) y ZIGBEE.
Main components on the Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena
Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena bill of materials (BOM)
47 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CC2520 | QFN-28-1EP_5x5mm_Pitch0.5mm | U1 |
| 1 | CC2591 | DFN-16-1EP_3x4mm_Pitch0.45mm | U2 |
| 1 | INV_F_ANT | INV_F_ANT | A1 |
| 1 | 32MHz | Crystal_SMD_5032_4Pads | X1 |
| 1 | CONN_5 | bornier5 | P1 |
| 1 | CONN_4 | bornier4 | P2 |
| 1 | C | C_0402 | 1uF/6.3V1 |
| 2 | PCB_HOLE | Led_Hole | H1, H2 |
| 1 | Plantilla_EDU-CIAA | Plantilla_EDU-CIAA | MP1 |
| 1 | Conn_PonchoMP_2x_20x2 | Conn_Poncho_Izquierdo | XA1 |
| 1 | 1K | C_0402 | L1 |
| 4 | 1.0nH | C_0402 | L2, L3, L5, L10 |
| 1 | 1 K | C_0402 | L4 |
| 1 | 2 nF | C_0402 | L6 |
| 1 | 5.1nH | C_0402 | L7 |
| 1 | 1.1nH | C_0402 | L8 |
| 1 | 1.5nH | C_0402 | L9 |
| 8 | 100nF | C_0402 | C1, C2, C3, C4, C5, C6, C7, C8 |
| 1 | 2.2uF/4V | C_0402 | C9 |
| 3 | 1nF | C_0402 | C10, C11, C12 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1.0pF | C_0402 | C13 |
| 1 | 15pF | C_0402 | C14 |
| 1 | 6.8pF | C_0402 | C15 |
| 1 | 2.7pF | C_0402 | C16 |
| 1 | 100K | R_0402 | R1 |
| 1 | 1M | R_0402 | R2 |
| 1 | 56K 1% | R_0402 | R3 |
| 4 | 0 | R_0402 | R4, R5, R6, R7 |
| 1 | 330 | R_0402 | R8 |
| 1 | 4.3k 1% | R_0402 | R9 |
| 1 | 3.3 1% | R_0402 | R10 |
Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena design files
The KiCad project lives in the Juanvmont/Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena-PCB repository on GitHub; these links point at the commit this page was built from.
Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena: common questions
How big is the Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena PCB?
The Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena measures 41 × 70.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena?
47 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena design files?
From the Juanvmont/Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena-PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena design in my own project?
The repository has no license, so all rights stay with Juanvmont. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kRadioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568