6 open source boards using the CC2520
Real designs built with the CC2520, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
RCCAR IF Board GPS
vedderb
81 × 55 mm170 parts4LGPL-3.0145Gw
jonasblixt
70.6 × 42 mm165 parts4LNo license32STM32
QuadcopterSystem
vedderb
67 × 50 mm91 parts2LGPL-3.029Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena
Juanvmont
41 × 70.5 mm47 parts2LNo license1STM32
Blixten
jonasblixt
35 × 20 mm60 parts4LNo license32STM32
RFMote PA
vedderb
64 × 27 mm73 parts4LGPL-3.0145
The CC2520 in open source designs
The gallery holds 6 open source boards using the CC2520 from 4 GitHub repositories; a typical one measures about 65.5 × 46 mm and carries around 82 components.
67% use four copper layers or more, and 50% carry an open source license.
The most starred is RCCAR IF Board GPS by vedderb.
Parts used alongside the CC2520
Microcontrollers on boards using the CC2520
What boards using the CC2520 are built for
CC2520: common questions
Where can I find a CC2520 reference design?
Each of the 6 boards on this page is a real design using the CC2520. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the CC2520?
The MCP16311/2, MPU9150 and STM32F40X_LQFP100 appear in the most repositories here.
Which microcontrollers do boards using the CC2520 use?
Most are built on STM32 (4).
How big is a typical board using the CC2520?
The median is 65.5 × 46 mm, and 33% are two-layer designs.
What is the most popular open source board using the CC2520?
By GitHub stars, RCCAR IF Board GPS by vedderb, with 145 stars.
Can I simulate one of these boards using the CC2520 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.