STM32F4 REV0
About the STM32F4 REV0 PCB
STM32F4 REV0 is an open source STM32 PCB design by Junaidk11, published on GitHub. It is a 4-layer board measuring 51 × 50.3 mm, with 46 components from 35 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the MP2359DJ-LF-Z and USBLC6-2SC6. By type, the board carries 16 capacitors, 11 resistors, 5 connectors, 4 diodes, 3 ICs and 3 inductors.
From the project
A repository to store all PCB designed using KiCAD
Developed a sudden interest in PCB design, will upload all my PCB design projects here using kiCAD
Main components on the STM32F4 REV0
STM32F4 REV0 bill of materials (BOM)
46 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP2359DJ-LF-Z | SOT-23-6 | U1 |
| 1 | STM32F405RGT6 | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J1 |
| 1 | SWD | PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 2 | Conn_01x04 | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J3, J4 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J5 |
| 1 | 250mA | Fuse_1206_3216Metric | F1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 2 | B5819W | D_SOD-123 | D1, D2 |
| 1 | RED | LED_0603_1608Metric | D3 |
| 1 | BLUE | LED_0603_1608Metric | D4 |
| 1 | 600 @ 600MHz | L_0805_2012Metric | FB1 |
| 1 | 10u | L_Sunlord_MWSA0518_5.4x5.2mm | L1 |
| 1 | 39n | L_0402_1005Metric | L2 |
| 3 | 10u | C_1206_3216Metric | C1, C3, C4 |
| 1 | 10n | C_0603_1608Metric | C2 |
| 1 | 4u7 | C_0603_1608Metric | C5 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 100n | C_0402_1005Metric | C6, C7, C8, C9, C10 |
| 1 | 1u | C_0402_1005Metric | C11 |
| 1 | 10n | C_0402_1005Metric | C12 |
| 2 | 2u2 | C_0603_1608Metric | C13, C14 |
| 2 | 12p | C_0402_1005Metric | C15, C16 |
| 1 | 100k | R_0603_1608Metric | R1 |
| 1 | 68k | R_0603_1608Metric | R2 |
| 1 | 47k | R_0603_1608Metric | R3 |
| 1 | 15k | R_0603_1608Metric | R4 |
| 1 | 270 | R_0603_1608Metric | R5 |
| 1 | 1k | R_0603_1608Metric | R6 |
| 1 | 10k | R_0402_1005Metric | R7 |
| 1 | 47 | R_0402_1005Metric | R8 |
| 1 | 1k5 | R_0603_1608Metric | R9 |
| 2 | 2k2 | R_0402_1005Metric | R10, R11 |
STM32F4 REV0 design files
The KiCad project lives in the Junaidk11/kicad_pcbs repository on GitHub; these links point at the commit this page was built from.
STM32F4 REV0: common questions
What microcontroller does the STM32F4 REV0 use?
The STM32F4 REV0 is built around the STM32F405RGT6, from the STM32 family.
How big is the STM32F4 REV0 PCB?
The STM32F4 REV0 measures 51 × 50.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STM32F4 REV0?
46 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32F4 REV0 design files?
From the Junaidk11/kicad_pcbs repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STM32F4 REV0 design in my own project?
The repository has no license, so all rights stay with Junaidk11. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F4 REV0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in kicad_pcbs
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k
STM32Brain board STM32F407
61.8 × 73.2 mm69 parts2LGPL-3.01.2k