26 open source boards using the MP2359DJ-LF-Z

Real designs built with the MP2359DJ-LF-Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

26 boardsClear filters|Most starred

How designs wire the MP2359DJ-LF-Z

Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the MP2359DJ-LF-Z connects to, and the resistors, capacitors and other passives placed on it.

  • The FB pin has a series resistor on 18 of 18 designs, most often 15 kΩ (then 47 kΩ).
  • The BST pin has a series capacitor on 17 of 18 designs, most often 10 nF (then 100 nF).
  • The SW pin has a series capacitor on 17 of 18 designs, most often 10 nF (then 100 nF).
  • The SW pin has a inductor on 17 of 18 designs, most often 10 µH (then 22 µH).
BSTpin 1Connected to: Signal 94%
  • Series capacitor on 94% · 10 nF (16), 100 nF (1)
GNDpin 2Connected to: GND 83% · a signal 17%
FBpin 3Connected to: Signal 100%
  • Series resistor on 100% · 15 kΩ (16), 47 kΩ (1), 1 kΩ (1)
  • Pull-up to 3.3V on 89% · 47 kΩ (15), 100 kΩ (1)
ENpin 4Connected to: Signal 89%
  • Series resistor on 89% · 100 kΩ (14), 68 kΩ (1), 120 kΩ (1)
  • Resistor to GND on 78% · 68 kΩ (13), 82 kΩ (1)
INpin 5Connected to: Signal 94%
  • Capacitor to GND on 89% · 10 µF (14), 10 nF (1)
  • Series resistor on 89% · 100 kΩ (14), 120 kΩ (1), 10 kΩ (1)
  • Ferrite bead on 89%
SWpin 6Connected to: Signal 100%
  • Series capacitor on 94% · 10 nF (16), 100 nF (1)
  • Inductor on 94% · 10 µH (15), 22 µH (1), 4.7 µH (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LittleBrain-STM32F4-Sensorboard by pms67, STM32F4-Reference-PCB by pms67, Daedalus by 0xJeremy and STM32F405RGT6-and-HDC1080-Development-Board by FatihTuncc.

The MP2359DJ-LF-Z in open source designs

The gallery holds 26 open source boards using the MP2359DJ-LF-Z from 18 GitHub repositories; a typical one measures about 55 × 51 mm and carries around 46 components.

65% use four copper layers or more, and 12% carry an open source license.

The most starred is LittleBrain-STM32F4-Sensorboard by pms67.

Microcontrollers on boards using the MP2359DJ-LF-Z

MP2359DJ-LF-Z: common questions

Where can I find a MP2359DJ-LF-Z reference design?

Each of the 26 boards on this page is a real design using the MP2359DJ-LF-Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MP2359DJ-LF-Z FB pin?

The FB pin has a series resistor on 18 of 18 designs, most often 15 kΩ (then 47 kΩ). Counted from the KiCad layouts of 18 open source designs using the MP2359DJ-LF-Z.

How is the MP2359DJ-LF-Z BST pin connected?

The BST pin has a series capacitor on 17 of 18 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 18 open source designs using the MP2359DJ-LF-Z.

How is the MP2359DJ-LF-Z SW pin connected?

The SW pin has a series capacitor on 17 of 18 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 18 open source designs using the MP2359DJ-LF-Z.

What parts are used alongside the MP2359DJ-LF-Z?

The STM32F405RGT6, USBLC6-2SC6, BMI088, BMP280 and W25N01GVZEIG appear in the most repositories here.

Which microcontrollers do boards using the MP2359DJ-LF-Z use?

Most are built on STM32 (21).

How big is a typical board using the MP2359DJ-LF-Z?

The median is 55 × 51 mm, and 35% are two-layer designs.

What is the most popular open source board using the MP2359DJ-LF-Z?

By GitHub stars, LittleBrain-STM32F4-Sensorboard by pms67, with 337 stars.

Can I simulate one of these boards using the MP2359DJ-LF-Z before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part