Bobcat tail light
juppeee·bobcat-tail-light-pcb·3_KiCad_source/THT/Heck_LED.kicad_pcb
About the Bobcat tail light PCB
Bobcat tail light is an open source PCB design by juppeee, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 134 × 30 mm, with 30 components from 9 distinct parts.
By type, the board carries 16 resistors, 8 diodes, 4 transistors and 2 connectors.
It belongs with the power & battery designs in this gallery.
From the project
Tail light PCB (THT + SMD) for the AN3DRC RC Skid Steer Loader by Andrew (AN3DRC). Print files on MakerWorld.
PCB for working tail, brake and reverse lights in the tailgate of the AN3DRC 3D-printed RC Tracked Skid Steer Loader.
Print files (tailgate frame, bezel, LED housings, lenses) and assembly: MakerWorld
View the assembled PCB in 3D (GitHub shows an interactive viewer: rotate, zoom)
Board: 134 × 30 mm, 2 layers, 1.6 mm. 8 LEDs (3 mm) on the front facing the tailgate, all other parts on the back. 4 mounting holes 2.2 mm (M2 or 2.2 mm self-tapping screws, max. 5 mm long). Driven by a Pro Micro: 4 channels, each pin HIGH switches its two LEDs on through a low-side MOSFET. The LEDs run from the…

Bobcat tail light bill of materials (BOM)
30 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | BS170 | TO-92_Inline_Wide | Q1, Q2, Q3, Q4 |
| 1 | Pro Micro 5-pol | MagPogo_1x05_P2.50mm_Straight | J1 |
| 1 | Akku 12V 2-pol | MagPogo_1x02_P2.50mm_Straight | J2 |
| 6 | LED rot | LED_D3.0mm | D1, D2, D3, D4, D5, D6 |
| 2 | LED weiss | LED_D3.0mm | D7, D8 |
| 4 | 1.5K 1.5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 2 | 680 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
| 6 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9, R10, R11, R12 |
| 4 | 100K 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13, R14, R15, R16 |
Bobcat tail light design files
The KiCad project lives in the juppeee/bobcat-tail-light-pcb repository on GitHub; these links point at the commit this page was built from.
Bobcat tail light: common questions
How big is the Bobcat tail light PCB?
The Bobcat tail light measures 134 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bobcat tail light?
30 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bobcat tail light design files?
From the juppeee/bobcat-tail-light-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bobcat tail light design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k