HardLabs

Hack-Club-Project-

jvaishvam-ops·Hack-Club-Project-

Hack-Club-Project- PCB layout, top view — open source Raspberry Pi board by jvaishvam-ops

About the Hack-Club-Project- PCB

Hack-Club-Project- is an open source Raspberry Pi PCB design by jvaishvam-ops, published on GitHub. It is a 2-layer board measuring 55 × 79 mm, with 6 components from 3 distinct parts.

Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. By type, the board carries 4 switches, 1 module and 1 connector.

From the project

This project is a custom PCB design for a compact input/control board built around a microcontroller footprint and four push-button switch positions. The design includes the complete board layout, routing, and associated fabrication outputs in this repository.

This project is a custom PCB design for a compact input/control board built around a microcontroller footprint and four push-button switch positions. The design includes the complete board layout, routing, and associated fabrication outputs in this repository.

- BOM.md — bill of materials - JOURNAL.md — build and design notes - README.md — project documentation

Hack-Club-Project-, from the project README
From the project README

Main components on the Hack-Club-Project-

RaspberryPi_Pico_W

Hack-Club-Project- bill of materials (BOM)

6 components, 3 distinct parts.

QtyPartRefs
1
RaspberryPi_Pico_W
A1
1
Conn_01x04_Pin
J1
4
SW_Push
SW1, SW2, SW3, SW4

Hack-Club-Project- design files

The KiCad project lives in the jvaishvam-ops/Hack-Club-Project- repository on GitHub; these links point at the commit this page was built from.

Hack-Club-Project-: common questions

What microcontroller does the Hack-Club-Project- use?

The Hack-Club-Project- is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.

How big is the Hack-Club-Project- PCB?

The Hack-Club-Project- measures 55 × 79 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hack-Club-Project-?

6 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hack-Club-Project- design files?

From the jvaishvam-ops/Hack-Club-Project- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Hack-Club-Project- design in my own project?

The repository has no license, so all rights stay with jvaishvam-ops. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hack-Club-Project- without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards