LightProcessor
K0iNguyen·LightProcessor·LightProcessorPCB/LightProcessor.kicad_pcb
About the LightProcessor PCB
LightProcessor is an open source STM32 PCB design by K0iNguyen, published on GitHub. It is a 4-layer board measuring 192.1 × 182.1 mm, with 127 components from 28 distinct parts.
Its main chip is the STM32G474RET6, from the STM32 family. Other key parts include the STLINK-V3MODS, LM324, AP2112K-3.3 and SN74HC4066N. By type, the board carries 56 resistors, 27 diodes, 17 capacitors, 13 ICs, 5 switches and 2 connectors.
From the project
PCB code and design for Optical chemical potential mapping research at Zeng Lab, Purdue University.
PCB program and design for Optical chemical potential mapping processor at Zeng Lab, Purdue University.
Main components on the LightProcessor
LightProcessor bill of materials (BOM)
127 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G474RET6 | QFP50P1200X1200X160-64N | IC1 |
| 1 | STLINK-V3MODS | STLink_V3MODS | U1 |
| 6 | LM324 | DIP825W47P254L1917H533Q14 | U2, U4, U6, U7, U8, U9 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 4 | SN74HC4066N | N14 | U10, U11, U12, U13 |
| 1 | 16MHZ 16MHz | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_Amphenol_124019772112A | J1 |
| 1 | PJ-202B | CUI_PJ-202B | J2 |
| 5 | Conn_Coaxial | CONN BNC JACK RA 50 OHM PCB | ADC1, ADC2, ADC3, ADC4, DAC1 |
| 4 | SW_SP5T_NR01105 | SW_NKK_NR01 | SW7, SW8, SW9, SW11 |
| 1 | TACTILE_6MM Tactile_6mm | SW_PUSH_6mm | SW10 |
| 4 | D | D_0805_2012Metric | D2, D3, D4, D5 |
| 17 | LED | LED_0805_2012Metric | D22, D30, D31, D32, D33, D35, D36, D37 +9 |
| 5 | RED | LED_0805_2012Metric | D23, D29, D34, D39, D44 |
| 1 | GREEN | LED_0805_2012Metric | D49 |
| 1 | FerriteBead | C_0805_2012Metric | FB1 |
| 4 | 4.7U 4.7u | C_0805_2012Metric | C1, C3, C5, C7 |
| 8 | 0.1U 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C6, C8, C11, C15, C21, C22 |
| 1 | 0.1 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 2 | 12P 12p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C20 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19 |
| 4 | 500K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1, R9, R17, R25 |
| 8 | 330K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R2, R4, R10, R12, R18, R20, R26, R28 |
| 4 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R3, R11, R19, R27 |
| 4 | 250K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R5, R13, R21, R29 |
| 4 | 110K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R6, R14, R22, R30 |
| 31 | 100K | R_0805_2012Metric | R53, R54, R55, R56, R57, R58, R59, R60 +23 |
| 1 | 0 | R_0805_2012Metric | R91 |
LightProcessor design files
The KiCad project lives in the K0iNguyen/LightProcessor repository on GitHub; these links point at the commit this page was built from.
LightProcessor: common questions
What microcontroller does the LightProcessor use?
The LightProcessor is built around the STM32G474RET6, from the STM32 family.
How big is the LightProcessor PCB?
The LightProcessor measures 192.1 × 182.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the LightProcessor?
127 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LightProcessor design files?
From the K0iNguyen/LightProcessor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LightProcessor design in my own project?
The repository has no license, so all rights stay with K0iNguyen. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LightProcessor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in LightProcessor
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k