LightProcessor preFreeRoute

K0iNguyen·LightProcessor·LightProcessorPCB/LightProcessor_preFreeRoute.kicad_pcb

LightProcessor preFreeRoute PCB layout, top view — open source STM32 board by K0iNguyen

About the LightProcessor preFreeRoute PCB

LightProcessor preFreeRoute is an open source STM32 PCB design by K0iNguyen, published on GitHub. It is a 4-layer board measuring 199.5 × 177.1 mm, with 127 components from 28 distinct parts.

Its main chip is the STM32G474RET6, from the STM32 family. Other key parts include the STLINK-V3MODS, LM324, AP2112K-3.3 and SN74HC4066N. By type, the board carries 56 resistors, 27 diodes, 17 capacitors, 13 ICs, 5 switches and 2 connectors.

From the project

PCB code and design for Optical chemical potential mapping research at Zeng Lab, Purdue University.

PCB program and design for Optical chemical potential mapping processor at Zeng Lab, Purdue University.

Main components on the LightProcessor preFreeRoute

LightProcessor preFreeRoute bill of materials (BOM)

127 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G474RET6
IC1
1
STLINK-V3MODS
U1
6
LM324
U2, U4, U6, U7, U8, U9
1
AP2112K-3.3
U3
4
SN74HC4066N
U10, U11, U12, U13
1
16MHZ
16MHz
Y1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
PJ-202B
J2
5
Conn_Coaxial
ADC1, ADC2, ADC3, ADC4, DAC1
4
SW_SP5T_NR01105
SW7, SW8, SW9, SW11
1
TACTILE_6MM
Tactile_6mm
SW10
4
D
D2, D3, D4, D5
17
LED
D22, D30, D31, D32, D33, D35, D36, D37 +9
5
RED
D23, D29, D34, D39, D44
1
GREEN
D49
1
FerriteBead
FB1
4
4.7U
4.7u
C1, C3, C5, C7
8
0.1U
0.1u
C2, C4, C6, C8, C11, C15, C21, C22
1
0.1
C16
2
12P
12p
C17, C20
Show 8 more
QtyPartRefs
2
1u
C18, C19
4
500K
R1, R9, R17, R25
8
330K
R2, R4, R10, R12, R18, R20, R26, R28
4
1M
R3, R11, R19, R27
4
250K
R5, R13, R21, R29
4
110K
R6, R14, R22, R30
31
100K
R53, R54, R55, R56, R57, R58, R59, R60 +23
1
0
R91

LightProcessor preFreeRoute design files

The KiCad project lives in the K0iNguyen/LightProcessor repository on GitHub; these links point at the commit this page was built from.

LightProcessor preFreeRoute: common questions

What microcontroller does the LightProcessor preFreeRoute use?

The LightProcessor preFreeRoute is built around the STM32G474RET6, from the STM32 family.

How big is the LightProcessor preFreeRoute PCB?

The LightProcessor preFreeRoute measures 199.5 × 177.1 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the LightProcessor preFreeRoute?

127 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LightProcessor preFreeRoute design files?

From the K0iNguyen/LightProcessor repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the LightProcessor preFreeRoute design in my own project?

The repository has no license, so all rights stay with K0iNguyen. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LightProcessor preFreeRoute without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in LightProcessor

Similar boards