HardLabs

PicoFightingBoard-TURBO

Kadoyu·PicoFightingBoard-TURBO·boards/v1.1a_TURBO/PicoFightingBoard.kicad_pcb

PicoFightingBoard-TURBO PCB layout, top view — open source RP2040/RP2350 board by Kadoyu

About the PicoFightingBoard-TURBO PCB

PicoFightingBoard-TURBO is an open source RP2040/RP2350 PCB design by Kadoyu, published on GitHub. It is a 2-layer board measuring 96.2 × 45.2 mm, with 25 components from 12 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the SN74LV1T34DBV. By type, the board carries 15 connectors, 7 resistors, 2 ICs and 1 capacitor.

From the project

Open source PCB for arcade sticks using Raspberry Pi Pico.

Main components on the PicoFightingBoard-TURBO

PicoSN74LV1T34DBV

PicoFightingBoard-TURBO bill of materials (BOM)

25 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Pico
U1
1
SN74LV1T34DBV
U2
4
CONN_01X04_MALE
Conn_01x04_Male
J1, J4, J11, J12
1
CONN_02X10_ODD_EVEN
Conn_02x10_Odd_Even
J2
1
CONN_01X05_MALE
Conn_01x05_Male
J3
4
ST01X05
ST01x05
J5, J6, J7, J8
2
CONN_01X04_MALE
Conn_01x04_Male
J9, J13
2
CONN_01X02_MALE
Conn_01x02_Male
J10, J14
1
CONN_01X04_MALE
Conn_01x04_Male
J15
1
0.1UF
0.1uF
C1
5
330
R1, R2, R3, R4, R5
2
4.7K
4.7k
R6, R7

PicoFightingBoard-TURBO design files

The KiCad project lives in the Kadoyu/PicoFightingBoard-TURBO repository on GitHub; these links point at the commit this page was built from.

PicoFightingBoard-TURBO: common questions

What microcontroller does the PicoFightingBoard-TURBO use?

The PicoFightingBoard-TURBO is built around the Pico, from the RP2040/RP2350 family.

How big is the PicoFightingBoard-TURBO PCB?

The PicoFightingBoard-TURBO measures 96.2 × 45.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PicoFightingBoard-TURBO?

25 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PicoFightingBoard-TURBO design files?

From the Kadoyu/PicoFightingBoard-TURBO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PicoFightingBoard-TURBO design in my own project?

The repository has no license, so all rights stay with Kadoyu. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PicoFightingBoard-TURBO without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards