Robotrace v1 Markersensor
Kageyana·robotrace_v1·Circuit/robotrace_v1_Markersensor/robotrace_v1_Markersensor.kicad_pcb
About the Robotrace v1 Markersensor PCB
Robotrace v1 Markersensor is an open source PCB design by Kageyana, published on GitHub. It is a 2-layer board measuring 25 × 10 mm, with 7 components from 7 distinct parts.
Other key parts include the S7136. By type, the board carries 2 capacitors, 2 resistors, 1 IC, 1 connector and 1 diode.
It belongs with the robotics & motion designs in this gallery.
Main components on the Robotrace v1 Markersensor
Robotrace v1 Markersensor bill of materials (BOM)
7 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | S7136 | S7136 | U1 |
| 1 | FFC_4P | Molex_FFC_1x4-1MP_P0.5mm_Horizontal | J1 |
| 1 | SIR19-21C/TR8 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 1μ | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | 0.1μ | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
Robotrace v1 Markersensor design files
The KiCad project lives in the Kageyana/robotrace_v1 repository on GitHub; these links point at the commit this page was built from.
Robotrace v1 Markersensor: common questions
How big is the Robotrace v1 Markersensor PCB?
The Robotrace v1 Markersensor measures 25 × 10 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Robotrace v1 Markersensor?
7 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Robotrace v1 Markersensor design files?
From the Kageyana/robotrace_v1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Robotrace v1 Markersensor design in my own project?
The repository has no license, so all rights stay with Kageyana. Use it as a reference, and ask the author before reusing the design.
More boards in robotrace_v1
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979