9 open source boards using the S7136
Real designs built with the S7136, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Robotrace sensorV4
shimotoriharuki
98.2 × 60 mm89 parts2LBSD-3-Clause4Total
Kageyana
100 × 47.8 mm47 parts2LNo license1Total
Kageyana
100 × 47.8 mm47 parts2LNo license1LineBoard
fTomo-robot
117 × 70 mm65 parts2LNo license0SideSensor
shimotoriharuki
35 × 7.1 mm7 parts2LGPL-3.03SideSensor
HuyVo117
35 × 7.1 mm7 parts2LGPL-3.00Robotrace v1 Markersensor
Kageyana
25 × 10 mm7 parts2LNo license1Robotrace v1 Markersensor
Kageyana
25 × 10 mm7 parts2LNo license1Line sensor
daisuke-ym
140 × 40 mm39 parts2LNo license0
How designs wire the S7136
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the S7136 connects to, and the resistors, capacitors and other passives placed on it.
- The VOUT pin has a pull-up to 5V on 6 of 7 designs, most often 10 kΩ.
- The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 2 | Connected to: 5V 100% |
|
| VOUTpin 3 | Connected to: A connector 86% |
|
| GNDpin 4 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Robotrace sensorV4 by shimotoriharuki, SideSensor by shimotoriharuki, Robotrace v1 Markersensor by Kageyana and Robotrace v1 Markersensor by Kageyana.
The S7136 in open source designs
The gallery holds 9 open source boards using the S7136 from 7 GitHub repositories; a typical one measures about 98.2 × 40 mm and carries around 39 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Robotrace sensorV4 by shimotoriharuki.
Microcontrollers on boards using the S7136
What boards using the S7136 are built for
S7136: common questions
Where can I find a S7136 reference design?
Each of the 9 boards on this page is a real design using the S7136. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the S7136 VOUT pin?
The VOUT pin has a pull-up to 5V on 6 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the S7136.
What decoupling capacitors do designs use on the S7136 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the S7136.
Which microcontrollers do boards using the S7136 use?
Most are built on STM32 (1).
How big is a typical board using the S7136?
The median is 98.2 × 40 mm, and 100% are two-layer designs.
What is the most popular open source board using the S7136?
By GitHub stars, Robotrace sensorV4 by shimotoriharuki, with 4 stars.
Can I simulate one of these boards using the S7136 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.