Robotrace v1 main
Kageyana·robotrace_v1_design·robotrace_v1_main/robotrace_v1_main.kicad_pcb
About the Robotrace v1 main PCB
Robotrace v1 main is an open source STM32 PCB design by Kageyana, published on GitHub. It is a 2-layer board measuring 100 × 71 mm, with 129 components from 61 distinct parts.
Its main chip is the STM32F446RE, from the STM32 family. Other key parts include the ICM-20608, LTC3624EDD-25#PBF, MAX22201ATC+, LT1963AEFE-3.3 and INA260. By type, the board carries 49 resistors, 42 capacitors, 13 connectors, 8 ICs, 6 diodes and 4 jumpers.
It belongs with the robotics & motion designs in this gallery.
From the project
2022 robotrace
Main components on the Robotrace v1 main
Robotrace v1 main bill of materials (BOM)
129 components, 61 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446RE | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | ICM-20608 | LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U2 |
| 1 | LTC3624EDD-25#PBF | DFN-8-1EP_3x3mm_P0.5mm_EP1.65x2.38mm | U3 |
| 2 | MAX22201ATC+ | DFN-12-1EP_3x3mm_P0.5mm_EP1.6x2.5mm | U4, U5 |
| 1 | LT1963AEFE-3.3 | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm | U6 |
| 2 | INA260 | TSSOP-16_4.4x5mm_P0.65mm | U7, U8 |
| 1 | IRLML6344 | SOT-23 | Q1 |
| 1 | ECS-2520S33-120-FN-TR | Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm | Y1 |
| 1 | Sidesensor1 | Molex_FFC_1x4-1MP_P0.5mm_Horizontal | J1 |
| 1 | Sidesensor2 | Molex_FFC_1x4-1MP_P0.5mm_Horizontal | J2 |
| 1 | UART | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J3 |
| 1 | I2C | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J4 |
| 1 | general | PinSocket_2x05_P1.27mm_Vertical | J5 |
| 1 | ST-Link | JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J6 |
| 1 | BATT_IN | Molex_mini-SPOX_1x03_P2.54mm_Vertical | J7 |
| 1 | Micro_SD_Card_Det | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J8 |
| 1 | Linesensor | Molex_1x16_P0.50mm_Horizontal | J9 |
| 1 | Enc1 | PinSocket_2x05_P1.27mm_Vertical | J10 |
| 1 | Motor2 | Molex_mini-SPOX_1x02_P2.54mm_Vertical | J11 |
| 1 | Motor1 | Molex_mini-SPOX_1x02_P2.54mm_Vertical | J12 |
Show 41 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Enc2 | PinSocket_2x05_P1.27mm_Vertical | J13 |
| 4 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 1 | TVAF06-A020B-R | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | SKRHABE010 | SKRHAAE010 | SW2 |
| 1 | FR01FR16P-S | FR01FR16P-S | SW3 |
| 1 | OSTB0603C1C-A | LED_Cree-PLCC4_2x2mm_CW | D1 |
| 1 | Red(OSHR1608) | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | 3SMBJ5930B-TP | D_SMA | D3 |
| 1 | 3SMBJ5920B-TP | D_SMA | D4 |
| 1 | Yellow(OSYL1608) | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | Blue(OSBL1608) | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 1 | BLM18PG331SN1D | D_0603_1608Metric | FB1 |
| 1 | 2.2μ(IHLP1212BZER2R2M11) | L_Vishay_IHLP-1212 | L1 |
| 20 | 0.1μ | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C4, C5, C6, C7, C8, C10, C11 +12 |
| 2 | 0.01μ | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C20 |
| 3 | 2.2μ | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C22, C25 |
| 5 | 1μ | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C19, C27, C28, C42 |
| 2 | 100μ | CP_Elec_6.3x7.7 | C15, C16 |
| 6 | 47μ | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C17, C18, C26, C31, C33, C38 |
| 1 | 10μ | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C23 |
| 1 | 0.47μ | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C24 |
| 1 | 22μ | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C29 |
| 1 | 22μ | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C37 |
| 3 | 680 | R_0603_1608Metric | R1, R2, R3 |
| 12 | 10k | R_0603_1608Metric | R4, R13, R22, R35, R38, R39, R40, R41 +4 |
| 1 | 40.2k | R_0603_1608Metric | R5 |
| 1 | 9.76k | R_0603_1608Metric | R6 |
| 1 | 6.2k | R_0603_1608Metric | R7 |
| 1 | 3k | R_0603_1608Metric | R8 |
| 4 | 4.7k | R_0603_1608Metric | R9, R14, R46, R48 |
| 1 | 2k | R_0603_1608Metric | R10 |
| 1 | 3.3k | R_0603_1608Metric | R11 |
| 1 | 5.1k | R_0603_1608Metric | R12 |
| 3 | 22k | R_0603_1608Metric | R15, R20, R25 |
| 2 | 51k | R_0603_1608Metric | R16, R17 |
| 12 | R | R_0603_1608Metric | R18, R21, R23, R26, R27, R28, R29, R30 +4 |
| 1 | 70 | R_0603_1608Metric | R19 |
| 1 | 47k | R_0603_1608Metric | R24 |
| 2 | 14k | R_0603_1608Metric | R36, R37 |
| 1 | 0 | R_0603_1608Metric | R47 |
| 1 | 4.7k | R_Array_Convex_4x0402 | RN1 |
Robotrace v1 main design files
The KiCad project lives in the Kageyana/robotrace_v1_design repository on GitHub; these links point at the commit this page was built from.
Robotrace v1 main: common questions
What microcontroller does the Robotrace v1 main use?
The Robotrace v1 main is built around the STM32F446RE, from the STM32 family.
How big is the Robotrace v1 main PCB?
The Robotrace v1 main measures 100 × 71 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Robotrace v1 main?
129 components, from 61 distinct parts. The full bill of materials is listed on this page.
Where can I download the Robotrace v1 main design files?
From the Kageyana/robotrace_v1_design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Robotrace v1 main design in my own project?
The repository has no license, so all rights stay with Kageyana. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Robotrace v1 main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in robotrace_v1_design
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k