2 open source boards using the LT1963AEFE-3.3
Real designs built with the LT1963AEFE-3.3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Robotrace v1 main
Kageyana
100 × 71 mm129 parts2LNo license1STM32
Robotrace v1 main
Kageyana
100 × 71 mm129 parts2LNo license1
The LT1963AEFE-3.3 in open source designs
The gallery holds 2 open source boards using the LT1963AEFE-3.3 from 2 GitHub repositories; a typical one measures about 100 × 71 mm and carries around 129 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Robotrace v1 main by Kageyana.
Parts used alongside the LT1963AEFE-3.3
Microcontrollers on boards using the LT1963AEFE-3.3
What boards using the LT1963AEFE-3.3 are built for
LT1963AEFE-3.3: common questions
Where can I find a LT1963AEFE-3.3 reference design?
Each of the 2 boards on this page is a real design using the LT1963AEFE-3.3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LT1963AEFE-3.3?
The ICM-20608, INA260, LTC3624EDD-25#PBF, MAX22201ATC+ and STM32F446RE appear in the most repositories here.
Which microcontrollers do boards using the LT1963AEFE-3.3 use?
Most are built on STM32 (2).
How big is a typical board using the LT1963AEFE-3.3?
The median is 100 × 71 mm, and 100% are two-layer designs.
What is the most popular open source board using the LT1963AEFE-3.3?
By GitHub stars, Robotrace v1 main by Kageyana, with 1 stars.
Can I simulate one of these boards using the LT1963AEFE-3.3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.