Picoballoon
kajusK·picoballoon·hw/picobaloon/picobaloon.kicad_pcb
About the Picoballoon PCB
Picoballoon is an open source STM32 PCB design by kajusK, published on GitHub. It is a 2-layer board measuring 41 × 56.3 mm, with 47 components from 27 distinct parts.
Its main chip is the STM32F070CBTx, from the STM32 family. Other key parts include the LMT87DCK, MCP1640CH, HPD13 (SX1276), SIM28ML and MS5607-02BA. By type, the board carries 16 capacitors, 15 resistors, 6 ICs, 3 diodes, 2 transistors and 2 connectors.
It belongs with the rf & radio and power & battery designs in this gallery.
From the project
Picoballoon challange on Brno observatory. Team Deadbadger.
Picoballoon challange 2019, team deadbadger probe -------------------------------------------------
This repo contains source codes and hw design of the picoballoon probe designed for https://www.hvezdarna.cz/?p=7694.
Due to the lack of free time, the pcb is very suboptimal as I needed single sided board with wider traces for diy manufacturing process (made it few days before the launch, didn't have enough time to send it to a pcb house).

Main components on the Picoballoon
Picoballoon bill of materials (BOM)
47 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMT87DCK | SOT-353_SC-70-5 | U1 |
| 1 | MCP1640CH | SOT-23-6 | U2 |
| 1 | STM32F070CBTx | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | HPD13 (SX1276) | HOPERF_RFM9XW_SMD | U4 |
| 1 | SIM28ML | SIM28ML | U5 |
| 1 | MS5607-02BA | LGA-8_3x5mm_P1.25mm | U6 |
| 1 | BC847 | SOT-23 | Q1 |
| 1 | BC857 | SOT-23 | Q2 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | DEBUG | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | 3V | BatteryHolder_Keystone_3001_1x12mm | BT1 |
| 1 | BAT20J | D_SOD-323 | D1 |
| 1 | 2v | D_SOD-323 | D2 |
| 1 | 3v | D_SOD-323 | D3 |
| 1 | SRN2510F-4R7M | L_Abracon_ASPI-3012S | L1 |
| 1 | BLM21AG601SN1D | L_0805_2012Metric | L2 |
| 10 | 100n | C_0805_2012Metric | C1, C3, C5, C8, C9, C10, C11, C13 +2 |
| 1 | 3F3/3V | CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 10n | C_0805_2012Metric | C4 |
| 3 | 1u | C_0805_2012Metric | C6, C12, C14 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10u | C_0805_2012Metric | C7 |
| 3 | 100k | R_0805_2012Metric | R1, R4, R5 |
| 7 | 10k | R_0805_2012Metric | R2, R8, R9, R10, R11, R12, R13 |
| 1 | 5k6 | R_0805_2012Metric | R3 |
| 1 | 270k | R_0805_2012Metric | R6 |
| 1 | 470k | R_0805_2012Metric | R7 |
| 2 | 1M | R_0805_2012Metric | R14, R15 |
Picoballoon design files
The KiCad project lives in the kajusK/picoballoon repository on GitHub; these links point at the commit this page was built from.
Picoballoon: common questions
What microcontroller does the Picoballoon use?
The Picoballoon is built around the STM32F070CBTx, from the STM32 family.
How big is the Picoballoon PCB?
The Picoballoon measures 41 × 56.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Picoballoon?
47 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Picoballoon design files?
From the kajusK/picoballoon repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Picoballoon design in my own project?
The repository has no license, so all rights stay with kajusK. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Picoballoon without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k