Eye adapter
About the Eye adapter PCB
Eye adapter is an open source PCB design by Kalilinuxloverr, published on GitHub under the MIT license. It is a 2-layer board measuring 42 × 30 mm, with 7 components from 6 distinct parts.
By type, the board carries 3 connectors, 3 capacitors and 1 resistor.
It belongs with the robotics & motion and displays & leds designs in this gallery.
From the project
Wall-E-artiger Schreibtisch-Begleiter: Ampel fuer Claude Code & Downloads, Motorfader, Augen-Displays. ESP32-S3, Swift, KiCad, 3D-Druck.
Regeln (JLCPCB 2-Lagen): Leiterbahn ≥ 0,2 mm, Abstand ≥ 0,2 mm, Via 0,8/0,4 mm, Rand 0,3 mm. Netzklassen: Power 1,5 mm (Mainboard) / 1,0 mm, Motor 0,8 mm, 3V3 0,8 mm, Default 0,3 mm. Massefläche beidseitig, Sperrzone unter der DevKit-Antenne.
Die Erstversion aller Dateien wurde aus gen/boards.py erzeugt — eine Tabelle „Bauteil → Pin → Netz → Position“. So sind Schaltplan, Layout und netlist.json per Konstruktion identisch, und tools/test-kicad.sh prüft das gegen KiCads eigene Netzliste.
Eye adapter bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | vom Mainboard J7 | PinHeader_1x10_P2.54mm_Vertical | J11 |
| 1 | GC9A01 links | PinSocket_1x07_P2.54mm_Vertical | J12 |
| 1 | GC9A01 rechts | PinSocket_1x07_P2.54mm_Vertical | J13 |
| 1 | 1u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C19 |
| 2 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C20, C21 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17 |
Eye adapter design files
The KiCad project lives in the Kalilinuxloverr/Desk-Mate repository on GitHub; these links point at the commit this page was built from.
Eye adapter: common questions
How big is the Eye adapter PCB?
The Eye adapter measures 42 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Eye adapter?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Eye adapter design files?
From the Kalilinuxloverr/Desk-Mate repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Eye adapter design in my own project?
Yes, under the terms of its MIT license, which Kalilinuxloverr chose for the repository.
More boards in Desk-Mate
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k