Micro meter
kalkyl·micro-meter
About the Micro meter PCB
Micro meter is an open source STM32 PCB design by kalkyl, published on GitHub. It is a 2-layer board measuring 129.9 × 72.7 mm, with 132 components from 44 distinct parts.
Its main chip is the STM32F411CEU6, from the STM32 family. Other key parts include the MP2359, XC6206P332MR and MCP6002-ISN. By type, the board carries 48 capacitors, 30 diodes, 30 resistors, 12 connectors, 4 ICs and 4 inductors.
Main components on the Micro meter
Micro meter bill of materials (BOM)
132 components, 44 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP2359 | TSOT-23-6 | U1 |
| 1 | STM32F411CEU6 | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 1 | XC6206P332MR | SOT-23 | U3 |
| 1 | MCP6002-ISN | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DC_IN | PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | SPI | PinSocket_2x04_P2.54mm_Vertical | J2 |
| 1 | I2C / UART | PinSocket_2x04_P2.54mm_Vertical | J3 |
| 1 | IN1 | PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | IN2 | PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | IN3 | PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | IN4 | PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | SWD | PinHeader_2x05_P1.27mm_Vertical | J8 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J9 |
| 1 | 5V_OUT | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | LEDS_DATA | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | LEDS_EXT | PinHeader_1x03_P2.54mm_Vertical | J12 |
| 3 | TP_GND | TestPoint_Loop_D2.50mm_Drill1.0mm | TP2, TP5, TP9 |
| 1 | B5819W | D_SOD-123 | D1 |
| 24 | WS2812C | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D3, D7, D8, D9, D10, D11, D12 +16 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | SM4007 | D_SOD-123F | D4, D5, D30 |
| 2 | GRN | LED_0805_2012Metric | D6, D13 |
| 3 | 600@100MHz | L_0805_2012Metric | FB1, FB2, FB3 |
| 1 | 10u | L_TDK_NLV25_2.5x2.0mm | L1 |
| 2 | 12p | C_0402_1005Metric | C1, C2 |
| 1 | 10uF/25V | C_0805_2012Metric | C3 |
| 1 | 4u7 | C_0603_1608Metric | C4 |
| 1 | 10n | C_0402_1005Metric | C5 |
| 4 | 22u | C_0603_1608Metric | C6, C7, C34, C37 |
| 6 | 10u | C_0603_1608Metric | C8, C9, C12, C13, C16, C19 |
| 25 | 0.1u | C_0402_1005Metric | C10, C11, C14, C15, C17, C18, C24, C25 +17 |
| 4 | 1n | C_0603_1608Metric | C20, C21, C22, C23 |
| 4 | 220p | C_0603_1608Metric | C26, C27, C28, C29 |
| 1 | 47 | R_0402_1005Metric | R1 |
| 1 | 100k | R_0402_1005Metric | R2 |
| 1 | 27k | R_0402_1005Metric | R3 |
| 1 | 10k | R_0402_1005Metric | R4 |
| 1 | 390 | R_0402_1005Metric | R5 |
| 5 | 100 | R_0402_1005Metric | R6, R7, R8, R12, R13 |
| 1 | 47k | R_0402_1005Metric | R9 |
| 1 | 9k1 | R_0603_1608Metric | R10 |
| 7 | 3k9 | R_0603_1608Metric | R14, R21, R22, R24, R27, R30, R31 |
| 3 | 2k2 | R_0603_1608Metric | R15, R16, R23 |
| 8 | 15k | R_0603_1608Metric | R17, R18, R19, R20, R25, R26, R28, R29 |
Micro meter design files
The KiCad project lives in the kalkyl/micro-meter repository on GitHub; these links point at the commit this page was built from.
- Layoutmicro-meter.kicad_pcb
Micro meter: common questions
What microcontroller does the Micro meter use?
The Micro meter is built around the STM32F411CEU6, from the STM32 family.
How big is the Micro meter PCB?
The Micro meter measures 129.9 × 72.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Micro meter?
132 components, from 44 distinct parts. The full bill of materials is listed on this page.
Where can I download the Micro meter design files?
From the kalkyl/micro-meter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Micro meter design in my own project?
The repository has no license, so all rights stay with kalkyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Micro meter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k