11 open source boards using the MP2359

Real designs built with the MP2359, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the MP2359

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the MP2359 connects to, and the resistors, capacitors and other passives placed on it.

  • The BST pin has a series capacitor on 10 of 10 designs, most often 10 nF (then 22 nF).
  • The FB pin has a pull-up to 3.3V on 10 of 10 designs, most often 49.9 kΩ (then 47 kΩ).
  • The SW pin has a series capacitor on 10 of 10 designs, most often 10 nF (then 22 nF).
  • The SW pin has a inductor on 10 of 10 designs, most often 10 µH (then 4.7 µH).
BSTpin 1Connected to: Signal 100%
  • Series capacitor on 100% · 10 nF (7), 22 nF (2), 100 nF (1)
GNDpin 2Connected to: GND 100%
FBpin 3Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 49.9 kΩ (5), 47 kΩ (3), 82 kΩ (1)
  • Resistor to GND on 80% · 9.53 kΩ (3), 15 kΩ (2), 16.2 kΩ (1)
ENpin 4Connected to: Signal 100%
  • Pull-up to VCC on 50% · 100 kΩ (4)
  • Series resistor on 50% · 100 kΩ (5)
  • Resistor to GND on 30% · 68 kΩ (2), 27 kΩ (1)
INpin 5Connected to: VCC 50% · a signal 50%
  • Ferrite bead on 30%
SWpin 6Connected to: Signal 100%
  • Series capacitor on 100% · 10 nF (7), 22 nF (2), 100 nF (1)
  • Inductor on 100% · 10 µH (6), 4.7 µH (2), 3.3 µH (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-Devkit-Type-C by TobleMiner, Nsumo hardware by artfulbytes, Bms hardware by jsphuebner and STM32F405RGT6 STUnoPlus by r-pv.

The MP2359 in open source designs

The gallery holds 11 open source boards using the MP2359 from 10 GitHub repositories; a typical one measures about 54.7 × 55.8 mm and carries around 54 components.

64% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is ESP32-Devkit-Type-C by TobleMiner.

Microcontrollers on boards using the MP2359

MP2359: common questions

Where can I find a MP2359 reference design?

Each of the 11 boards on this page is a real design using the MP2359. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MP2359 BST pin connected?

The BST pin has a series capacitor on 10 of 10 designs, most often 10 nF (then 22 nF). Counted from the KiCad layouts of 10 open source designs using the MP2359.

What pull-up resistor is used on the MP2359 FB pin?

The FB pin has a pull-up to 3.3V on 10 of 10 designs, most often 49.9 kΩ (then 47 kΩ). Counted from the KiCad layouts of 10 open source designs using the MP2359.

How is the MP2359 SW pin connected?

The SW pin has a series capacitor on 10 of 10 designs, most often 10 nF (then 22 nF). Counted from the KiCad layouts of 10 open source designs using the MP2359.

What parts are used alongside the MP2359?

The STM32F405RGT6, USBLC6-2SC6, C6186, MSP430G2553IPW28 and RS3E075AT appear in the most repositories here.

Which microcontrollers do boards using the MP2359 use?

Most are built on STM32 (7), TI MSP430/CC (2), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the MP2359?

The median is 54.7 × 55.8 mm, and 64% are two-layer designs.

What is the most popular open source board using the MP2359?

By GitHub stars, ESP32-Devkit-Type-C by TobleMiner, with 91 stars.

Can I simulate one of these boards using the MP2359 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part