F1GameStation-Handheld
kami4ka·F1GameStation-Handheld·hardware/kicad/F1GameStation.kicad_pcb
About the F1GameStation-Handheld PCB
F1GameStation-Handheld is an open source PCB design by kami4ka, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 176 × 70 mm, with 133 components from 60 distinct parts.
Other key parts include the EA3059C, XC6206P302MR, W25Q128JVSIQ, IP5306 and MP3202DJ-LF-Z-MS. By type, the board carries 56 capacitors, 37 resistors, 16 switches, 6 ICs, 5 diodes and 5 inductors.
It belongs with the audio, displays & leds and power & battery designs in this gallery.
From the project
Open-source PSP-style handheld on the Allwinner F1C200s, about $25 to build: KiCad board, 3D-printed case, MiyooCFW firmware
KiCad 10 project for the F1GameStation main board, Rev 1.
The board can also be browsed without KiCad on the project site.
- Stackup: L1 signal, L2 GND, L3 power planes (3V3, 2V5, 1V2), L4 signal. Ground is carried by the L2 plane, outer pours and stitching vias, not by traces. - Sides: buttons, LEDs and the speaker are on the front; every other part is on the back. Parts under the battery stay below 2.4 mm. - USB: the D+/D− pair is coupled 0.16/0.1 mm with a 0.2 mm pour gap, about 90 Ω on JLC04161H-7628. - No vias in SMD pads, except the thermal vias under exposed pads. - Power: IP5306…
Main components on the F1GameStation-Handheld
F1GameStation-Handheld bill of materials (BOM)
133 components, 60 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EA3059C Everanalog | QFN-24_L4.0-W4.0-P0.50-BL-EP2.6 | U1 |
| 1 | XC6206P302MR UMW(友台半导体) | SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR | U2 |
| 1 | W25Q128JVSIQ Winbond(华邦) | SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL | U3 |
| 1 | IP5306 INJOINIC | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U10 |
| 1 | MP3202DJ-LF-Z-MS MSKSEMI | SOT-23-6 | U11 |
| 1 | NS4150B Nsiway | MSOP-8_3x3mm_P0.65mm | U12 |
| 1 | 24MHz YXC(扬兴晶振) | CRYSTAL-SMD_4P-L3.2-W2.5-BL | X1 |
| 1 | BATTERY 1S JST | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J1 |
| 1 | LCD 40P RGB (FPC043CS4001) JS | AFC24-S40FIA-00_REV | J2 |
| 1 | TF PUSH SHOU HAN(首韩) | TF-SMD_TF-PUSH | CARD1 |
| 1 | F1C200S-88 Allwinner | QFN-88_L10.0-W10.0-P0.40-BL-EP | F1C1S |
| 1 | KLJ-01304T-08R07W KELIKING | KLJ-01304T-08R07W | LS1 |
| 2 | SH-1808SN-250gf SHOU HAN(首韩) | SW-SMD_4P-L4.2-W3.4-P2.15-LS5.2 | SW1, SW2 |
| 1 | POWER ALPSALPINE | SKRTLAE010 | SW3 |
| 1 | UP ALPSALPINE | SKRRAAE010 | SW4 |
| 1 | DOWN ALPSALPINE | SKRRAAE010 | SW5 |
| 1 | LEFT ALPSALPINE | SKRRAAE010 | SW6 |
| 1 | RIGHT ALPSALPINE | SKRRAAE010 | SW7 |
| 1 | A ALPSALPINE | SKRRAAE010 | SW8 |
| 1 | B ALPSALPINE | SKRRAAE010 | SW9 |
Show 40 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | X ALPSALPINE | SKRRAAE010 | SW10 |
| 1 | Y ALPSALPINE | SKRRAAE010 | SW11 |
| 1 | L ALPSALPINE | SKRTLAE010 | SW12 |
| 1 | R ALPSALPINE | SKRTLAE010 | SW13 |
| 1 | SELECT SHOU HAN | SW-SMD_4P-L4.2-W3.4-P2.15-LS5.2 | SW14 |
| 1 | START SHOU HAN | SW-SMD_4P-L4.2-W3.4-P2.15-LS5.2 | SW15 |
| 1 | MENU SHOU HAN | SW-SMD_4P-L4.2-W3.4-P2.15-LS5.2 | SW16 |
| 1 | TYPE-C 16PIN 2MD(073) SHOU HAN(首韩) | USB-C-SMD_TYPE-C-16PIN-2MD-073 | USB1 |
| 1 | XL-1608SURC-06 XINGLIGHT(成兴光) | LED0603-RD_RED | LED1 |
| 4 | XL-1608SURC-06 XINGLIGHT | LED0603-RD_RED | D2, D3, D4, D5 |
| 1 | B5819WS MDD | D_SOD-323 | D6 |
| 3 | 2.2uH cjiang(长江微电) | IND-SMD_L2.5-W2.0-B | L1, L2, L3 |
| 1 | 1uH cjiang | L_Changjiang_FXL0630 | L4 |
| 1 | 22uH cjiang | L_Sunlord_SWPA4020S | L5 |
| 17 | 10uF CCTC(三环) | C0603 | C1, C4, C5, C7, C12, C13, C17, C22 +9 |
| 20 | 100nF SAMSUNG(三星) | C0603 | C2, C3, C6, C8, C11, C14, C15, C16 +12 |
| 2 | 15pF SAMSUNG(三星) | C0603 | C9, C10 |
| 3 | 1uF SAMSUNG(三星) | C0603 | C21, C23, C47 |
| 5 | 22uF SAMSUNG | C_0805_2012Metric | C49, C50, C53, C54, C55 |
| 4 | 10uF SAMSUNG | C_0805_2012Metric | C51, C52, C57, C61 |
| 1 | 1uF 50V YAGEO | C_0805_2012Metric | C56 |
| 3 | 100nF SAMSUNG | C_0603_1608Metric | C58, C59, C62 |
| 1 | 1uF SAMSUNG | C_0603_1608Metric | C60 |
| 1 | 680kΩ YAGEO(国巨) | R0603 | R1 |
| 2 | 150kΩ YAGEO(国巨) | R0603 | R2, R4 |
| 1 | 470kΩ YAGEO(国巨) | R0603 | R3 |
| 4 | 100kΩ YAGEO(国巨) | R0603 | R5, R6, R7, R51 |
| 7 | 10kΩ VISHAY(威世) | R0603 | R8, R9, R10, R11, R12, R13, R16 |
| 2 | 2kΩ YAGEO(国巨) | R0603 | R14, R15 |
| 3 | 1kΩ FOJAN(富捷) | R0603 | R17, R18, R20 |
| 1 | 22Ω FOJAN(富捷) | R0603 | R21 |
| 2 | 200kΩ YAGEO(国巨) | R0603 | R22, R50 |
| 1 | 0Ω SAE(世盟/世爱) | R0603 | R24 |
| 2 | 5.1kΩ FOJAN(富捷) | R0603 | R25, R26 |
| 1 | 0.5Ω UNI-ROYAL | R_0603_1608Metric | R38 |
| 1 | 2Ω UNI-ROYAL | R_0603_1608Metric | R39 |
| 5 | 10kΩ UNI-ROYAL | R_0603_1608Metric | R40, R42, R44, R45, R46 |
| 1 | 10Ω UNI-ROYAL | R_0603_1608Metric | R43 |
| 2 | 30kΩ UNI-ROYAL | R_0603_1608Metric | R47, R48 |
| 1 | 100kΩ UNI-ROYAL | R_0603_1608Metric | R49 |
F1GameStation-Handheld design files
The KiCad project lives in the kami4ka/F1GameStation-Handheld repository on GitHub; these links point at the commit this page was built from.
F1GameStation-Handheld: common questions
How big is the F1GameStation-Handheld PCB?
The F1GameStation-Handheld measures 176 × 70 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the F1GameStation-Handheld?
133 components, from 60 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the F1GameStation-Handheld design files?
From the kami4ka/F1GameStation-Handheld repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the F1GameStation-Handheld design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which kami4ka chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k