Pic ir thermometer

kamorrissey·pic-ir-thermometer·kicad/IR_Thermometer/IR_Thermometer.kicad_pcb

Pic ir thermometer PCB layout, top view — open source PIC board by kamorrissey

About the Pic ir thermometer PCB

Pic ir thermometer is an open source PIC PCB design by kamorrissey, published on GitHub under the MIT license. It is a 4-layer board measuring 67.7 × 57.2 mm, with 18 components from 13 distinct parts.

Its main chip is the PIC16LF19156-I/SP, from the PIC family. By type, the board carries 6 capacitors, 4 resistors, 2 connectors, 2 switches, 1 IC and 1 transistor.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

Open-source hardware and firmware for a PIC16LF19156-driven IR non-contact thermometer using a Melexis MLX90614 sensor and Lumex LCD-S401M16KR LCD segment display.

(Under construction. Circuit schematic is stable; PCB design to be provided. Firmware mostly complete but does not yet read from temperature sensor or read/write EEPROM. 3d-printable, handheld enclosure design to be provided.)

Open-source hardware and firmware for a PIC16LF19156-driven IR non-contact thermometer using a Melexis MLX90614 sensor and Lumex LCD-S401M16KR LCD segment display.

Pic ir thermometer, from the project README
From the project README

Main components on the Pic ir thermometer

PIC16LF19156-I/SP

Pic ir thermometer bill of materials (BOM)

18 components, 13 distinct parts.

QtyPartRefs
1
PIC16LF19156-I/SP
PIC16LF19156-I_SP
IC1
1
SI2323
Q1
1
ICSP Conn
J1
1
Sensor Conn
J2
1
1747
MLX90614ESF-BAA
DS1
1
LCD-S401M16KR
LCD1
1
Option Button
SW1
1
Sample Button
SW2
1
1uF
C1
2
100nF
C2, C3
3
0.27uF
C4, C5, C6
2
4.7K
R1, R2
2
10K
R3, R4

Pic ir thermometer design files

The KiCad project lives in the kamorrissey/pic-ir-thermometer repository on GitHub; these links point at the commit this page was built from.

Pic ir thermometer: common questions

What microcontroller does the Pic ir thermometer use?

The Pic ir thermometer is built around the PIC16LF19156-I/SP, from the PIC family.

How big is the Pic ir thermometer PCB?

The Pic ir thermometer measures 67.7 × 57.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Pic ir thermometer?

18 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pic ir thermometer design files?

From the kamorrissey/pic-ir-thermometer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pic ir thermometer design in my own project?

Yes, under the terms of its MIT license, which kamorrissey chose for the repository.

Can I test firmware for the Pic ir thermometer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards