HW MoveCritic KiCad Project
kapis20·IEEECompetition·HW_MoveCritic/HW_MoveCritic_KiCad_Project/HW_MoveCritic_KiCad_Project.kicad_pcb
About the HW MoveCritic KiCad Project PCB
HW MoveCritic KiCad Project is an open source STM32 PCB design by kapis20, published on GitHub. It is a 4-layer board measuring 39.7 × 27.7 mm, with 48 components from 28 distinct parts.
Its main chip is the STM32WB55CEU6, from the STM32 family. Other key parts include the USBLC6-2P6, MIC5365-3.3YD5 and BNO086. By type, the board carries 23 capacitors, 9 resistors, 4 ICs, 3 inductors, 2 crystals and 2 connectors.
From the project
This is the repo for IEEE Pitch Competition codes and files storage
1) Open CV (for windows: py -m pip install opencv-python) 2) numpy (for windows: py -m pip install numpy) 3) MediaPipe (for windows: pip install mediapipe)
Note: Both squat and lateral raise code are essentially the same except for the angle calculation and display.
Main components on the HW MoveCritic KiCad Project
HW MoveCritic KiCad Project bill of materials (BOM)
48 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32WB55CEU6 | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | USBLC6-2P6 | SOT-666 | U2 |
| 1 | MIC5365-3.3YD5 | SOT-23-5 | U3 |
| 1 | BNO086 | LGA-28_5.2x3.8mm_P0.5mm | U5 |
| 1 | 830009678 32KHz768 | 830009678 | X1 |
| 1 | LFXTAL061677REEL 32MHz | Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | X2 |
| 1 | JST_PH_2.00mm | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | USB4105-GF-A-120 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | Antenna_Chip | 2400MHz_PCB_Inverted_F | AE1 |
| 1 | DLF162500LT-5028A1 | DLF162500LT-5028A1 | FLT1 |
| 1 | SW_Push | PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | B5819W-TP B5819W | D_SOD-123 | D1 |
| 1 | 150040RS73240 LED | LED_0402_1005Metric | D2 |
| 1 | ASCH0010050510NJCP 10n | L_0402_1005Metric | L1 |
| 1 | LSQNA201212T100KR 10u | L_0805_2012Metric | L2 |
| 1 | LQG15HS2N7S02 2n7 | L_0402_1005Metric | L3 |
| 11 | KGM03AR51A104KN 0u1 | C_0201_0603Metric | C1, C2, C3, C4, C5, C6, C8, C10 +3 |
| 7 | KGM03DR50J475MH 4u7 | C_0201_0603Metric | C7, C9, C11, C16, C17, C18, C19 |
| 2 | KGM05ACG1C100KH 10p | C_0402_1005Metric | C12, C13 |
| 1 | CBR04C808B5GACAUTO 0p8 | C_0402_1005Metric | C14 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GRM1555C1HR30BA01J 0p3 | C_0402_1005Metric | C15 |
| 1 | KGM03AR71H101KH 100p | C_0201_0603Metric | C23 |
| 2 | ERA-3ARW102V 1k | R_0603_1608Metric | R1, R2 |
| 2 | RP0402BRD075K1L 5k1 | R_0402_1005Metric | R3, R4 |
| 1 | ERJ-1GJF2200C 220R | R_0201_0603Metric | R5 |
| 1 | MCT0603HZ0000ZP500 0R | R_0603_1608Metric | R6 |
| 2 | ERA-2VEB2201X 2k2 | R_0402_1005Metric | R7, R8 |
| 1 | CRCW040210K0FKEDC 10k | R_0402_1005Metric | R10 |
HW MoveCritic KiCad Project design files
The KiCad project lives in the kapis20/IEEECompetition repository on GitHub; these links point at the commit this page was built from.
HW MoveCritic KiCad Project: common questions
What microcontroller does the HW MoveCritic KiCad Project use?
The HW MoveCritic KiCad Project is built around the STM32WB55CEU6, from the STM32 family.
How big is the HW MoveCritic KiCad Project PCB?
The HW MoveCritic KiCad Project measures 39.7 × 27.7 mm, has 4 copper layers and is 1.58 mm thick.
How many components are on the HW MoveCritic KiCad Project?
48 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HW MoveCritic KiCad Project design files?
From the kapis20/IEEECompetition repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the HW MoveCritic KiCad Project design in my own project?
The repository has no license, so all rights stay with kapis20. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the HW MoveCritic KiCad Project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in IEEECompetition
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k