16 open source boards using the BNO086

Real designs built with the BNO086, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the BNO086

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the BNO086 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 4.7 µF).
  • The BOOTN pin has a pull-up to 3.3V on 11 of 12 designs, most often 10 kΩ (then 100 kΩ).
  • The CAP pin has a capacitor to GND on 11 of 12 designs, most often 100 nF.
  • The VDDIO pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 4.7 µF).
RESV_NCpin 1, 7, 8, 12, 13, 21, 22, 23, 24Connected to: Not connected 93%
GNDpin 2Connected to: GND 92%
VDDpin 3Connected to: 3.3V 92%
  • Decoupling capacitor on 92% · 100 nF (23), 4.7 µF (1), 1 µF (1)
BOOTNpin 4Connected to: The microcontroller 33%
  • Pull-up to 3.3V on 92% · 10 kΩ (9), 100 kΩ (1), 4.7 kΩ (1)
CAPpin 9Connected to: Signal 92%
  • Capacitor to GND on 92% · 100 nF (11)
CLKSEL0pin 10Connected to: GND 50% · 3.3V 42%
  • Capacitor to GND on 42% · 100 nF (11), 1 µF (1)
NRSTpin 11Connected to: The microcontroller 50%
  • Pull-up to 3.3V on 42% · 10 kΩ (5)
ENV_SCLpin 15Connected to: Signal 75% · not connected 25%
  • Pull-up to 3.3V on 75% · 2.2 kΩ (5), 4.7 kΩ (3), 10 kΩ (1)
ENV_SDApin 16Connected to: Signal 83% · not connected 17%
  • Pull-up to 3.3V on 83% · 2.2 kΩ (5), 4.7 kΩ (3), 10 kΩ (2)
SA0/H_MOSIpin 17Connected to: The microcontroller 25% · GND 17%
  • Pull-up to 3.3V on 33% · 10 kΩ (4)
H_SCL/SCK/RXpin 19Connected to: The microcontroller 58%, a connector 25%
  • Pull-up to 3.3V on 50% · 2.2 kΩ (3), 4.7 kΩ (2), 1 kΩ (1)
H_SDA/H_MISO/TXpin 20Connected to: The microcontroller 58%, a connector 25%
  • Pull-up to 3.3V on 50% · 2.2 kΩ (3), 4.7 kΩ (2), 1 kΩ (1)
GNDIOpin 25Connected to: GND 100%
XOUT32/CLKSEL1pin 26Connected to: Signal 50% · GND 25% · 3.3V 17%
  • Capacitor to GND on 58% · 100 nF (5), 22 pF (3), 12 pF (1)
  • Crystal on 33% · 32.768 kHz (3), 32 kHz (1)
XIN32pin 27Connected to: Signal 67% · not connected 25%
  • Capacitor to GND on 50% · 22 pF (4), 12 pF (1), 15 pF (1)
  • Crystal on 42% · 32.768 kHz (4), 32 kHz (1)
VDDIOpin 28Connected to: 3.3V 92%
  • Decoupling capacitor on 92% · 100 nF (23), 4.7 µF (1), 1 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MIDAS MK1 by ISSUIUC, Aether by nasheed-x, VersaSens by esl-epfl and VCU by formulaslug.

The BNO086 in open source designs

The gallery holds 16 open source boards using the BNO086 from 12 GitHub repositories; a typical one measures about 62.5 × 60 mm and carries around 102 components.

94% use four copper layers or more, and 13% carry an open source license.

The most starred is MIDAS MK1 by ISSUIUC.

Parts used alongside the BNO086

Microcontrollers on boards using the BNO086

BNO086: common questions

Where can I find a BNO086 reference design?

Each of the 16 boards on this page is a real design using the BNO086. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the BNO086 VDD pin?

The VDD pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 12 open source designs using the BNO086.

What pull-up resistor is used on the BNO086 BOOTN pin?

The BOOTN pin has a pull-up to 3.3V on 11 of 12 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 12 open source designs using the BNO086.

How is the BNO086 CAP pin connected?

The CAP pin has a capacitor to GND on 11 of 12 designs, most often 100 nF. Counted from the KiCad layouts of 12 open source designs using the BNO086.

Which microcontrollers do boards using the BNO086 use?

Most are built on ESP32 (6), STM32 (5) and Raspberry Pi (3).

How big is a typical board using the BNO086?

The median is 62.5 × 60 mm, and 6% are two-layer designs.

What is the most popular open source board using the BNO086?

By GitHub stars, MIDAS MK1 by ISSUIUC, with 31 stars.

Can I simulate one of these boards using the BNO086 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part