USCB-C-Type chardger design using

Karanvaswani·USCB-C-Type-chardger-design-using-KiCad

USCB-C-Type chardger design using PCB layout, top view — open source board by Karanvaswani

About the USCB-C-Type chardger design using PCB

USCB-C-Type chardger design using is an open source PCB design by Karanvaswani, published on GitHub. It is a 2-layer board measuring 44.3 × 23.8 mm, with 17 components from 7 distinct parts.

Other key parts include the CP2102N-Axx-xQFN28. By type, the board carries 7 resistors, 4 capacitors, 3 diodes, 2 connectors and 1 IC.

It belongs with the usb & debug tools designs in this gallery.

From the project

A compact USB 2.0 Type-C to UART bridge PCB based on the Silicon Labs CP2102N (QFN-28). Designed in KiCad 9.0.

A compact USB 2.0 Type-C to UART bridge PCB based on the Silicon Labs CP2102N (QFN-28). Designed in KiCad 9.0.

This board converts USB-C to a 5-pin UART header, suitable for microcontroller programming, serial debugging, and embedded system development. It includes onboard ESD protection and status LEDs.

1. Install KiCad 9.0 2. Clone this repository:

3. Open hardware/usbcuart.kicadpro` in KiCad

Main components on the USCB-C-Type chardger design using

USCB-C-Type chardger design using bill of materials (BOM)

17 components, 7 distinct parts.

QtyPartRefs
1
CP2102N-Axx-xQFN28
U1
1
Conn_01x05_Pin
J1
1
USB_C_Receptacle_USB2.0_16P
J2
1
PRTR5V0U2X
D1
2
LED
D3, D5
4
100nf
C2, C3, C4, C5
7
1k
R1, R2, R4, R6, R7, R8, R9

USCB-C-Type chardger design using design files

The KiCad project lives in the Karanvaswani/USCB-C-Type-chardger-design-using-KiCad repository on GitHub; these links point at the commit this page was built from.

USCB-C-Type chardger design using: common questions

How big is the USCB-C-Type chardger design using PCB?

The USCB-C-Type chardger design using measures 44.3 × 23.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USCB-C-Type chardger design using?

17 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the USCB-C-Type chardger design using design files?

From the Karanvaswani/USCB-C-Type-chardger-design-using-KiCad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the USCB-C-Type chardger design using design in my own project?

The repository has no license, so all rights stay with Karanvaswani. Use it as a reference, and ask the author before reusing the design.

Similar boards