MAX20008-DevBoard
Kariboo-Corp·MAX20008-DevBoard
About the MAX20008-DevBoard PCB
MAX20008-DevBoard is an open source PCB design by Kariboo-Corp, published on GitHub. It is a 4-layer board measuring 72 × 50 mm, with 21 components from 15 distinct parts.
By type, the board carries 5 test points, 1 connector and 1 inductor.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
This repo contains my work on the MAX20008 buck converter. The Gerbers folder contains the fabrication outputs, the BOM+CPL folder contains the BOM and CPL.
This repo contains my work on the MAX20008 buck converter. The Gerbers folder contains the fabrication outputs, the BOM+CPL folder contains the BOM and CPL.
In the board dimensioning file from the V1 MUAV Board I estimated that the eventual current draw of the MUAV board would be at least 6A (generous estimate). I chose the MAX20008 buck converter, rated for 8A RMS. Here i detail the steps i took to dimension the different components .

MAX20008-DevBoard bill of materials (BOM)
21 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DNP Banana Plug | Banana_Jack_2Pin | J1 |
| 1 | C408135 2.2µF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CBIAS1 |
| 2 | DNP DNp | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CF1, Cc1 |
| 1 | C473201 47µF | CP_Elec_10x10.5 | CSup2 |
| 2 | C85960 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | Cbst1, Cbyp1 |
| 1 | C84455 100µF | C_1210_3225Metric | Cout1 |
| 1 | DNP | C_1210_3225Metric | Cout3 |
| 1 | C711100 4.7µF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | Csup1 |
| 1 | SB1060L | TO_277B | Drpp1 |
| 1 | DNP | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RCOMP1 |
| 1 | 294k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_OSC1 |
| 1 | 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_RST1 |
| 5 | C492400 TestPoint | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5 |
| 1 | J1 | XT60 conn | XT60_1 |
| 1 | DNP 10µH | SRP1265C | L1 |
MAX20008-DevBoard design files
The KiCad project lives in the Kariboo-Corp/MAX20008-DevBoard repository on GitHub; these links point at the commit this page was built from.
MAX20008-DevBoard: common questions
How big is the MAX20008-DevBoard PCB?
The MAX20008-DevBoard measures 72 × 50 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the MAX20008-DevBoard?
21 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MAX20008-DevBoard design files?
From the Kariboo-Corp/MAX20008-DevBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MAX20008-DevBoard design in my own project?
The repository has no license, so all rights stay with Kariboo-Corp. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k