Power hub

kartben·hw-testing-rack·electronics/power-hub/power-hub.kicad_pcb

Power hub PCB layout, top view — open source board by kartben

About the Power hub PCB

Power hub is an open source PCB design by kartben, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 120 × 70 mm, with 70 components from 22 distinct parts.

Other key parts include the TPS26600PWPR. By type, the board carries 27 resistors, 17 capacitors, 13 diodes, 7 connectors, 5 ICs and 1 transistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer

A 3D-printed, tilted test shelf for up to 16 development boards — every board in its own sliding drawer, power-switched, current-metered and exposed over the network with USB/IP by a Zephyr-powered ESP32-S3 in each bay.

▶ Interactive 3D model · BOM · Architecture · Mechanics · Cabling · Power · Electronics · Assembly · Firmware

Stadium shelf — 2020 aluminium frame, rows tilted 20° by printed tier brackets so every board, LED and label faces you. Each row is its own module with its own layout: 4 standard bays, or 2 double-width bays for i.MX-class EVKs. Drawers that stay connected — each bay…

Power hub, from the project README
From the project README

Main components on the Power hub

Power hub bill of materials (BOM)

70 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
5
TPS26600PWPR
Texas Instruments
U1, U2, U3, U4, U5
1
SUD50P06-15
UMW / Vishay
Q1
1
B2P-VH(LF)(SN)
24V IN
JST
J1
1
B2B-PH-K-S(LF)(SN)
ROW A
JST
J2
1
B2B-PH-K-S(LF)(SN)
ROW B
JST
J3
1
B2B-PH-K-S(LF)(SN)
ROW C
JST
J4
1
B2B-PH-K-S(LF)(SN)
ROW D
JST
J5
1
B2B-PH-K-S(LF)(SN)
ROW AUX
JST
J6
1
2x8 pin header 2.54 mm
SUPERVISOR
generic
J7
1
BZT52C12
CJ
D1
1
SMCJ33A
Littelfuse
D2
1
KT-0805G
24V
Hubei KENTO
D3
5
KT-0805G
ON
Hubei KENTO
D11, D12, D13, D14, D15
5
NCD0805R1
FAULT
NationStar
D21, D22, D23, D24, D25
2
RVT1H221M1010
220u/50V
Honor Elec
C1, C2
10
CL21B105KBFNNNE
1u
Samsung Electro-Mechanics
C11, C12, C13, C14, C15, C31, C32, C33 +2
5
CL10B223KB8NNNC
22n
Samsung Electro-Mechanics
C21, C22, C23, C24, C25
1
0603WAF1003T5E
100k
UNI-ROYAL(Uniroyal Elec)
R1
11
0805W8F1002T5E
10k
UNI-ROYAL(Uniroyal Elec)
R2, R41, R42, R43, R44, R45, R51, R52 +3
5
0603WAF4703T5E
470k
UNI-ROYAL(Uniroyal Elec)
R11, R12, R13, R14, R15
Show 2 more
QtyPartRefs
5
0603WAF7501T5E
7.5k
UNI-ROYAL(Uniroyal Elec)
R21, R22, R23, R24, R25
5
0603WAF1802T5E
18k
UNI-ROYAL(Uniroyal Elec)
R31, R32, R33, R34, R35

Power hub design files

The KiCad project lives in the kartben/hw-testing-rack repository on GitHub; these links point at the commit this page was built from.

Power hub: common questions

How big is the Power hub PCB?

The Power hub measures 120 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Power hub?

70 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Power hub design files?

From the kartben/hw-testing-rack repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Power hub design in my own project?

Yes, under the terms of its Apache-2.0 license, which kartben chose for the repository.

More boards in hw-testing-rack

Similar boards