Nuc fan controller

kavehs87·nuc-fan-controller

Nuc fan controller PCB layout, top view — open source board by kavehs87

About the Nuc fan controller PCB

Nuc fan controller is an open source PCB design by kavehs87, published on GitHub. It is a 2-layer board measuring 124 × 85 mm, with 32 components from 22 distinct parts.

Other key parts include the AMS1117-5.0 and AMS1117-3.3. By type, the board carries 10 capacitors, 9 resistors, 7 connectors, 3 transistors, 2 ICs and 1 diode.

It belongs with the power & battery designs in this gallery.

From the project

KiCad 10 board: 19V->12V buck for two 2-pin 12V fans, 12V->5V->3.3V for a 3.3V Pro Mini, follows the NUC ITE's PWM duty, and simulates the tach signal. ERC/DRC clean.

A board that lets three 12 V two‑pin fans be used in place of a NUC's stock 5 V fan, and that answers the NUC's tach input so the BIOS believes the fan it is asking for.

1. brings 12 V to the fans from a ready‑made module — an XL4016E1 step‑down (8 A, ~180 kHz) bolted to the enclosure wall and wired to this board through J6: 19 V in on pin 3, its two returns on pins 1–2, 12 V out on pin 4. The board's own 12 V parts are only C3 470 µF/25 V and C4 100 n; 2. 12 V → 5 V → 3.3 V for a 3.3 V / 8 MHz Arduino Pro Mini (AMS1117‑5.0 then AMS1117‑3.3, into the Pro Mini's VCC; RAW unused); 3. follows…

Nuc fan controller, from the project README
From the project README

Main components on the Nuc fan controller

Nuc fan controller bill of materials (BOM)

32 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-5.0
U2
1
AMS1117-3.3
U3
2
BC547B
Q1, Q2
1
IRFZ44N
Q3
1
19V IN
J1
1
NUC fan header
J2
1
FAN 2
J3
1
FAN 3
J4
1
Pro Mini
J5
1
BUCK MODULE
J6
1
FAN 1
J7
1
1N5819
D2
1
470uF 25V
C3
5
100n
C4, C6, C8, C11, C12
2
10uF
C5, C7
1
100p
C9
1
1uF
C10
3
1k
R2, R6, R8
1
4.7k
R3
1
2.2k
R4
Show 2 more
QtyPartRefs
3
10k
R5, R7, R10
1
120R
R9

Nuc fan controller design files

The KiCad project lives in the kavehs87/nuc-fan-controller repository on GitHub; these links point at the commit this page was built from.

Nuc fan controller: common questions

How big is the Nuc fan controller PCB?

The Nuc fan controller measures 124 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Nuc fan controller?

32 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Nuc fan controller design files?

From the kavehs87/nuc-fan-controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Nuc fan controller design in my own project?

The repository has no license, so all rights stay with kavehs87. Use it as a reference, and ask the author before reusing the design.

Similar boards