Speaker diy
KawaiButa·speaker-diy·projects/live-pa-system/backup_20261015_pre_perfboard_redesign/live-pa-system.kicad_pcb
About the Speaker diy PCB
Speaker diy is an open source PCB design by KawaiButa, published on GitHub. It is a 2-layer board measuring 180 × 110 mm, with 72 components from 43 distinct parts.
Other key parts include the NE5532P and LM317HVT. By type, the board carries 26 capacitors, 24 resistors, 7 connectors, 4 ICs, 3 diodes and 2 switches.
It belongs with the audio designs in this gallery.
From the project
A complete, open-hardware engineering design for a DIY Active Stage Monitor Loudspeaker optimized for live vocal and acoustic guitar performance at indoor venues (1–2 m listening distance).
A complete, open-hardware engineering design for a DIY Active Stage Monitor Loudspeaker optimized for live vocal and acoustic guitar performance at indoor venues (1–2 m listening distance).
The design combines an ultra-efficient 8-inch full-range transducer with an analog front-end, active excursion protection, a commercial high-efficiency Class-D power amplifier, and a modular home-buildable prototyping architecture.
Main components on the Speaker diy
Speaker diy bill of materials (BOM)
72 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | NE5532P | DIP-8_W7.62mm | U1, U2, U3 |
| 1 | LM317HVT | TO-220-3_Vertical | U4 |
| 1 | IRF4905 | TO-220-3_Vertical | Q1 |
| 1 | MIC_XLR_IN | Jack_XLR_Neutrik_NC3FAH_Horizontal | J1 |
| 1 | COMBO_LINE_IN | Jack_XLR-6.35mm_Neutrik_NCJ6FI-H_Horizontal | J2 |
| 1 | DC_36V_IN | BarrelJack_Horizontal | J3 |
| 1 | AMP_POWER_36V | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | AMP_AUDIO_IN | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | AMP_SPEAKER_OUT | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 1 | VISATON_BG20_8R | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7 |
| 1 | T3.15A_250V_5x20mm | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | 50k_RevLog_MIC_GAIN | Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | 10k_Log_MIC_VOL | Potentiometer_Bourns_3386P_Vertical | RV2 |
| 1 | 10k_Log_LINE_VOL | Potentiometer_Bourns_3386P_Vertical | RV3 |
| 1 | DPDT_MODE_SELECT | SW_CK_JS202011CQN_DPDT_Straight | SW1 |
| 1 | CONTOUR_BYPASS | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | SW2 |
| 1 | BZX79C12_12V | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 2 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D2, D3 |
| 1 | 1.0mH_AirCore_0.35R | L_Radial_D27.9mm_P19.05mm_Vishay_IHB-3 | L1 |
| 4 | 47pF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C10, C11 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 100nF/50V | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C3, C16, C18, C21, C25, C26 |
| 2 | 10uF/50V_BP | CP_Radial_D6.3mm_P2.50mm | C4, C5 |
| 6 | 10uF/25V | CP_Radial_D5.0mm_P2.00mm | C6, C7, C14, C15, C19, C22 |
| 2 | 68nF_Film | C_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C8, C9 |
| 2 | 1uF_Film | C_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C12, C13 |
| 1 | 470uF/50V_LowESR | CP_Radial_D10.0mm_P5.00mm | C17 |
| 1 | 100uF/25V | CP_Radial_D6.3mm_P2.50mm | C20 |
| 1 | 47uF/25V | CP_Radial_D5.0mm_P2.00mm | C23 |
| 1 | 4.7uF/250V_MKP | C_Rect_L18.0mm_W9.0mm_P15.00mm_FKS3_FKP3 | C24 |
| 6 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R12, R13, R18, R24 |
| 2 | 2.2k_0.1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5 |
| 2 | 4.7k_0.1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R6 |
| 1 | 47k_1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 330R_1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | 27k_1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 1.2k_1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 56k_1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 2 | 30k_0.1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14, R15 |
| 2 | 10k_0.1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16, R17 |
| 1 | 240R_1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R19 |
| 1 | 2.64k_1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R20 |
| 2 | 10k_1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R21, R22 |
| 1 | 8.2R_10W_NonInductive | R_Axial_Power_L25.0mm_W9.0mm_P30.48mm | R23 |
Speaker diy design files
The KiCad project lives in the KawaiButa/speaker-diy repository on GitHub; these links point at the commit this page was built from.
Speaker diy: common questions
How big is the Speaker diy PCB?
The Speaker diy measures 180 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Speaker diy?
72 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the Speaker diy design files?
From the KawaiButa/speaker-diy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Speaker diy design in my own project?
The repository has no license, so all rights stay with KawaiButa. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687