Pico-ESP32-DMR-Radio
kdnelezen·Pico-ESP32-DMR-Radio·Pico_SDR_Radio/Pico_SDR_Radio/hardware/pico_sdr_radio.kicad_pcb
About the Pico-ESP32-DMR-Radio PCB
Pico-ESP32-DMR-Radio is an open source ESP32 PCB design by kdnelezen, published on GitHub. It is a 2-layer board measuring 80 × 60 mm, with 1 components from 1 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family.
It belongs with the rf & radio and audio designs in this gallery.
From the project
Build a working DMR radio with instructions and hardware information
This repository contains the firmware, hardware designs, and documentation for an ESP32-based radio control head with a Raspberry Pi Pico and ADALM-PLUTO SDR module, supporting AM, USB, LSB, FM, CW, DMR, and APRS modes.
2. Firmware: Build and flash src/main.cpp using PlatformIO. 3. Hardware: Assemble per hardware/picosdrradio.sch and bom.csv. 4. Calibration: Run scripts/picocalibrate.py. 5. Documentation: See docs/picoinstructions.md for details.
Pico-ESP32-DMR-Radio bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | ESP32 |
Pico-ESP32-DMR-Radio design files
The KiCad project lives in the kdnelezen/Pico-ESP32-DMR-Radio repository on GitHub; these links point at the commit this page was built from.
Pico-ESP32-DMR-Radio: common questions
What microcontroller does the Pico-ESP32-DMR-Radio use?
The Pico-ESP32-DMR-Radio is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Pico-ESP32-DMR-Radio PCB?
The Pico-ESP32-DMR-Radio measures 80 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pico-ESP32-DMR-Radio?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pico-ESP32-DMR-Radio design files?
From the kdnelezen/Pico-ESP32-DMR-Radio repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Pico-ESP32-DMR-Radio design in my own project?
The repository has no license, so all rights stay with kdnelezen. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pico-ESP32-DMR-Radio without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k