HardLabs

Xiao esp32s3 breakout board

Kehaar38·video-sight·hardware/kicad/xiao_esp32s3_breakout_board/xiao_esp32s3_breakout_board.kicad_pcb

Xiao esp32s3 breakout board layout, top view — open source board by Kehaar38

About the Xiao esp32s3 breakout board

Xiao esp32s3 breakout board is an open source PCB design by Kehaar38, published on GitHub. It is a 2-layer board measuring 50.8 × 38.1 mm, with 7 components from 6 distinct parts.

By type, the board carries 5 connectors and 2 test points.

It belongs with the displays & leds and dev boards & breakouts designs in this gallery.

From the project

VIDEO SIGHT is a compact digital sight prototype built around Seeed Studio XIAO ESP32-S3 Sense.

VIDEO SIGHT is a compact digital sight prototype built around Seeed Studio XIAO ESP32-S3 Sense.

The project goal is a low-latency, approximately 1x-feeling video sight with camera input, LCD display, IMU-assisted attitude information, and a lightweight ballistic overlay for airsoft use.

- Main MCU: Seeed Studio XIAO ESP32-S3 Sense - Camera: XIAO ESP32-S3 Sense camera module - Display: Waveshare 1.83 inch LCD Rev2 / ST7789P / 240x284 - IMU: BNO055 module - UI sub-MCU: ATtiny1616 - Battery: protected 18650 cell - microSD CS: GPIO21 on XIAO ESP32-S3 Sense - Peripheral power switch: TPS22919…

Xiao esp32s3 breakout board bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO_BREAKOUT_BOARD
J1
1
CONN_02X03_ODD_EVEN
Conn_02x03_Odd_Even
J2
1
CONN_01X02_PIN
Conn_01x02_Pin
J3
2
CONN_01X07_SOCKET
Conn_01x07_Socket
J4, J5
1
CHIP_EN
TP1
1
GND
TP2

Xiao esp32s3 breakout board design files

The KiCad project lives in the Kehaar38/video-sight repository on GitHub; these links point at the commit this page was built from.

Xiao esp32s3 breakout board: common questions

How big is the Xiao esp32s3 breakout board?

The Xiao esp32s3 breakout board measures 50.8 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Xiao esp32s3 breakout board?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Xiao esp32s3 breakout board design files?

From the Kehaar38/video-sight repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Xiao esp32s3 breakout board design in my own project?

The repository has no license, so all rights stay with Kehaar38. Use it as a reference, and ask the author before reusing the design.

More boards in video-sight

Similar boards