HardLabs

HV-BOARD

kelu124·pic0rick·hardware/pulser/pulser_v1.0/hv_board/HV-BOARD.kicad_pcb

HV-BOARD layout, top view — open source board by kelu124
Simulate this board

About the HV-BOARD

HV-BOARD is an open source PCB design by kelu124, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 20.8 × 22.3 mm, with 8 components from 7 distinct parts.

By type, the board carries 4 capacitors, 2 connectors and 1 inductor.

From the project

An rp2040-based acquisition board for pulse-echo ultrasound

HV-BOARD bill of materials (BOM)

8 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SSQ-101-02-L-Q-RA
Conn_01x03_Socket
J5
1
SSQ-101-02-L-Q-RA
Conn_01x02_Socket
J7
1
IAS0105D24
B1
1
ILSB1206ER6R8K
6.8uH
VISHAY(威世)
L1
2
VJ1206Y104KXQCW1BC
4.7uF
C10, C11
1
VJ1206A220JXQPW1BC
1uF
C12
1
VJ1206Y104KXQCW1BC
1uF
C13

HV-BOARD design files

The KiCad project lives in the kelu124/pic0rick repository on GitHub; these links point at the commit this page was built from.

HV-BOARD: common questions

How big is the HV-BOARD?

The HV-BOARD measures 20.8 × 22.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HV-BOARD?

8 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HV-BOARD design files?

From the kelu124/pic0rick repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HV-BOARD design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which kelu124 chose for the repository.

More boards in pic0rick