PMOD-Pulser update

kelu124·pic0rick·hardware/pulser/pulser_v1.0/pulser/PMOD-Pulser_update.kicad_pcb

PMOD-Pulser update PCB layout, top view — open source board by kelu124

Simulate this board

About the PMOD-Pulser update PCB

PMOD-Pulser update is an open source PCB design by kelu124, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 63.3 × 22.3 mm, with 33 components from 20 distinct parts.

Other key parts include the SN74LVC2G04DBVT, MD1213K6-G and TC6320TG-G. By type, the board carries 12 capacitors, 6 ICs, 5 connectors, 4 resistors, 3 diodes and 2 inductors.

From the project

An rp2040-based acquisition board for pulse-echo ultrasound

Main components on the PMOD-Pulser update

SN74LVC2G04DBVT MD1213K6-G TC6320TG-G

PMOD-Pulser update bill of materials (BOM)

33 components, 20 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
2	SN74LVC2G04DBVT	SN74LVC2G04DBV	IC1, IC4
2	MD1213K6-G	MD1213	IC2, IC5
2	TC6320TG-G TI(德州仪器)	SOIC127P600X175-8N	IC3, IC6
1	132357-11 AMPHENOL_132357-11	AMPHENOL_132357-11	J1
1	SSQ-101-02-L-Q-RA Conn_01x02	PinHeader_2x01_P2.54mm_Horizontal	J2
1	61300611021 Conn_01x06	PinHeader_1x06_P2.54mm_Horizontal	J3
1	61300411121 Conn_01x03_Pin	PinHeader_1x03_P2.54mm_Vertical	J4
1	613012243121 Conn_01x02_Pin	PinHeader_1x02_P2.54mm_Vertical	J6
1	TC74VHC08F_EL,K,F_ TOSHIBA(东芝)	SOIC127P780X190-14N	H1
2	BAV99 DIODES(美台)	SOT-23	D1, D2
1	NCD0805G1 LED_Filled 国星光电	D_0805_2012Metric	D3
2	742792113 120Ohm 3 A	L_1206_3216Metric	FB1, FB2
5	VJ1206Y104KXQCW1BC 100nF	C_1206_3216Metric	C1, C8, C14, C15, C16
1	VJ1206Y104KXQCW1BC 1uF	C_1206_3216Metric	C2
2	1206ZD475KAT4A 100nF	C_1206_3216Metric	C3, C7
3	VJ1206Y104KXQCW1BC 10nF	C_1206_3216Metric	C4, C5, C9
1	VJ1206Y183KXAAC 1uF	C_1206_3216Metric	C6
1	WSL1206R1800FEA 1K	R_1206_3216Metric	R1
2	1206W4F1002T5E 10K	R_1206_3216Metric	R2, R3
1	560112132023 10K	R_1206_3216Metric	R4

PMOD-Pulser update design files

The KiCad project lives in the kelu124/pic0rick repository on GitHub; these links point at the commit this page was built from.

PMOD-Pulser update: common questions

How big is the PMOD-Pulser update PCB?

The PMOD-Pulser update measures 63.3 × 22.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PMOD-Pulser update?

33 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PMOD-Pulser update design files?

From the kelu124/pic0rick repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PMOD-Pulser update design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which kelu124 chose for the repository.

More boards in pic0rick