Panel
About the Panel PCB
Panel is an open source PCB design by kelu124, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 87 × 22.3 mm, with 42 components from 23 distinct parts.
Other key parts include the SN74LVC2G04DBVT, MD1213K6-G and TC6320TG-G. By type, the board carries 16 capacitors, 7 connectors, 6 ICs, 4 resistors, 3 diodes and 3 inductors.
From the project
An rp2040-based acquisition board for pulse-echo ultrasound
The pic0rick is a very central board for an ultrasound pulse-echo system. It is composed of a main board, based on the RP2040 (or RP2350) and easy to solder SMD, to which a single, and a double PMOD connector can connect to addons:
The main board is equipped with a 60Msps, 10bit ADC. Front end is protected against high-voltage pulses, and features a proven time-gain compensation system consisting in a AD8331 (7.5 dB to 55.5dB) with a controlling (MCP4812) SPI DAC. The single PMOD connector can plug to the Pulser board, which can be equipped with a simple +-25V generation board. Together…
Main components on the Panel
Panel bill of materials (BOM)
42 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SN74LVC2G04DBVT | SN74LVC2G04DBV | IC1, IC4 |
| 2 | MD1213K6-G | MD1213 | IC2, IC5 |
| 2 | TC6320TG-G | SOIC127P600X175-8N | IC3, IC6 |
| 1 | 142-0701-801 AMPHENOL_132357-11 | AMPHENOL_132357-11 | J1 |
| 1 | CONN_01X02 Conn_01x02 | PinHeader_2x01_P2.54mm_Horizontal | J2 |
| 1 | 61300611021 | PinHeader_1x06_P2.54mm_Horizontal | J3 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | CONN_01X03_SOCKET Conn_01x03_Socket | PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | CONN_01X02_SOCKET Conn_01x02_Socket | PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | TC74VHC08F_EL,K,F_ | SOIC127P780X190-14N | H1 |
| 1 | R2D-0524/P R2D-0524_P | R2D0524P | PS1 |
| 1 | VAL** | mouse-bite-3mm-slot | mouse-bite-3mm-slot |
| 2 | BAV99 | SOT-23 | D1, D2 |
| 1 | 150080GS75000 Green LED | D_0805_2012Metric | D3 |
| 2 | 742792113 120Ohm 3 A | L_1206_3216Metric | FB1, FB2 |
| 1 | ILSB1206ER6R8K 6.8uH | L_1206_3216Metric | L1 |
| 7 | 100NF 100nF | C_1206_3216Metric | C1, C3, C7, C8, C14, C15, C16 |
| 4 | 1UF 1uF | C_1206_3216Metric | C2, C6, C12, C13 |
| 3 | 10NF 10nF | C_1206_3216Metric | C4, C5, C9 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7UF 4.7uF | C_1206_3216Metric | C10, C11 |
| 1 | 1K | R_1206_3216Metric | R1 |
| 3 | 10K | R_1206_3216Metric | R2, R3, R4 |
Panel design files
The KiCad project lives in the kelu124/pic0rick repository on GitHub; these links point at the commit this page was built from.
Panel: common questions
How big is the Panel PCB?
The Panel measures 87 × 22.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Panel?
42 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Panel design files?
From the kelu124/pic0rick repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Panel design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which kelu124 chose for the repository.
More boards in pic0rick
RP2040/RP23503 in 1 Panel
87.1 × 78.3 mm63 parts4LTAPR-OHL-1.0107
RP2040/RP2350PICO ADC TEST
85 × 54 mm55 parts4LTAPR-OHL-1.0107
PMOD-Pulser update
63.3 × 22.3 mm33 parts2LTAPR-OHL-1.0107
MAX14866 PMOD
63 × 23.5 mm13 parts2LTAPR-OHL-1.0107
HV-BOARD
20.8 × 22.3 mm8 parts2LTAPR-OHL-1.0107
PMOD2VGA
47.3 × 16.3 mm7 parts2LTAPR-OHL-1.0107
PMOD2PSRAM
18.8 × 16.3 mm4 parts2LTAPR-OHL-1.0107