Switchjector
Ken-James·switchjector·switchjector/switchjector.kicad_pcb
About the Switchjector PCB
Switchjector is an open source PCB design by Ken-James, published on GitHub. It is a 4-layer board measuring 121.9 × 45.7 mm, with 123 components from 39 distinct parts.
Other key parts include the TPS552892RYQR, RTL8305NB-CG and LM1117MP-3.3. By type, the board carries 55 capacitors, 40 resistors, 4 fuses, 4 jumpers, 3 ICs and 3 connectors.
It belongs with the power & battery designs in this gallery.
From the project
The Switchjector is a Fast Ethernet (100Mbps) switch with 12v passive PoE. By utilizing a buck boost converter IC, the Switchjector can keep a steady 12v output with a power input from 5v to 24v to protect downstream devices from dirty power and brownouts
The Switchjector is a Fast Ethernet (100Mbps) switch with 12v passive PoE. By utilizing a buck boost converter IC, the Switchjector can keep a steady 12v output with a power input from 5v to 24v to protect downstream devices from dirty power and brownouts
/switchjector contains the KiCAD project /case contains the stl files for an optional 3d printed case /photos contains photos of the device in use
Main components on the Switchjector
Switchjector bill of materials (BOM)
123 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS552892RYQR | RYQ0021A-MFG | U201 |
| 1 | RTL8305NB-CG | QFN48_RTL8305_RTK | U301 |
| 1 | LM1117MP-3.3 | SOT-223-3_TabPin2 | U302 |
| 1 | XL2EL89CSI-111YLC-25M | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y301 |
| 1 | 2601-1102 | CONN2_2601-1102_WAG | J101 |
| 1 | RJHSE538104 | AMPHENOL_RJHSE538104 | J501 |
| 1 | RJHSE-5384 | AMPHENOL_RJHSE-5384 | J502 |
| 4 | 2920L200/24 | Fuse_2920_7451Metric | F501, F502, F503, F504 |
| 4 | MountingHole | hole_for_10-32 | H101, H102, H103, H104 |
| 4 | SOLDERJUMPER_2_BRIDGED SolderJumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP501, JP502, JP503, JP504 |
| 5 | PT61017PEL | Transformer_Ethernet_Bourns_PT61017PEL | TR301, TR601, TR701, TR801, TR901 |
| 1 | LED | LED_0603_1608Metric | D201 |
| 2 | FerriteBead_Small | R_0603_1608Metric | FB301, FB302 |
| 1 | 3.3UH 3.3uH | L_Coilcraft_XAL7070-XXX | L201 |
| 4 | 22UF 22uf | C_1210_3225Metric | C101, C208, C209, C210 |
| 2 | 120UF 120uf | CP_Radial_D8.0mm_P3.50mm | C102, C211 |
| 26 | 100NF 100nF | C_0402_1005Metric | C201, C204, C301, C302, C303, C304, C305, C306 +18 |
| 2 | 1UF 1uF | C_0603_1608Metric | C202, C207 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C203 |
| 1 | 15NF 15nF | C_0402_1005Metric | C205 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 68NF 68nF | R_0402_1005Metric | C206 |
| 2 | 33PF 33pF | C_0402_1005Metric | C310, C311 |
| 4 | 10UF 10uF | C_0805_2012Metric | C317, C318, C320, C321 |
| 2 | 22UF 22uF | C_0805_2012Metric | C319, C322 |
| 10 | 22NF 22nF | C_0402_1005Metric | C324, C325, C602, C603, C702, C703, C802, C803 +2 |
| 1 | 160K 160k | R_0402_1005Metric | R201 |
| 1 | 56K 56k | R_0402_1005Metric | R202 |
| 1 | 8m | R_1210_3225Metric | R203 |
| 1 | 270K 270k | R_0402_1005Metric | R204 |
| 1 | 30K 30k | R_0402_1005Metric | R205 |
| 1 | 301 | R_0402_1005Metric | R206 |
| 1 | 50K 50k | R_0402_1005Metric | R207 |
| 1 | 12K 12k | R_0603_1608Metric | R208 |
| 1 | 2.49K 2.49k | R_0402_1005Metric | R301 |
| 1 | 10K 10k | R_0402_1005Metric | R302 |
| 1 | 1 | R_0805_2012Metric | R303 |
| 20 | 49.9 | R_0402_1005Metric | R304, R305, R306, R307, R601, R602, R603, R604 +12 |
| 5 | 330 | R_0603_1608Metric | R501, R502, R503, R506, R507 |
| 4 | 5k | R_0603_1608Metric | R504, R505, R508, R509 |
Switchjector design files
The KiCad project lives in the Ken-James/switchjector repository on GitHub; these links point at the commit this page was built from.
Switchjector: common questions
How big is the Switchjector PCB?
The Switchjector measures 121.9 × 45.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Switchjector?
123 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Switchjector design files?
From the Ken-James/switchjector repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Switchjector design in my own project?
The repository has no license, so all rights stay with Ken-James. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k