HardLabs

M MUC

Kenkneeshio·SeniorDesign-Team9·KiCad/MCU1/M_MUC.kicad_pcb

M MUC PCB layout, top view — open source AVR/Arduino board by Kenkneeshio

About the M MUC PCB

M MUC is an open source AVR/Arduino PCB design by Kenkneeshio, published on GitHub. It is a 2-layer board measuring 43.2 × 38.1 mm, with 11 components from 10 distinct parts.

Its main chip is the ATmega328PB-A, from the AVR/Arduino family. By type, the board carries 3 capacitors, 2 connectors, 2 resistors, 1 IC, 1 crystal and 1 switch.

It belongs with the robotics & motion designs in this gallery.

From the project

This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub

Currently the GitHub Repo ignores .zip and .raw to save space

Main components on the M MUC

ATmega328PB-A

M MUC bill of materials (BOM)

11 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATmega328PB-A
U1
1
Crystal
Y1
1
6pin
J1
1
Conn_01x10
J2
1
TL3305AF160QG
SW_Push_Open
SW1
1
B0540W-7-F
LED
D1
2
CC0603JRX7R9BB104
22pF
C1, C2
1
CC0603JRX7R9BB104
100nF
C3
1
10K
R1
1
1k
R2

M MUC design files

The KiCad project lives in the Kenkneeshio/SeniorDesign-Team9 repository on GitHub; these links point at the commit this page was built from.

M MUC: common questions

What microcontroller does the M MUC use?

The M MUC is built around the ATmega328PB-A, from the AVR/Arduino family.

How big is the M MUC PCB?

The M MUC measures 43.2 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the M MUC?

11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the M MUC design files?

From the Kenkneeshio/SeniorDesign-Team9 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the M MUC design in my own project?

The repository has no license, so all rights stay with Kenkneeshio. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the M MUC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in SeniorDesign-Team9

Similar boards