HardLabs

RGB

Kenkneeshio·SeniorDesign-Team9·KiCad/RGB_test/RGB/RGB.kicad_pcb

RGB PCB layout, top view — open source board by Kenkneeshio

About the RGB PCB

RGB is an open source PCB design by Kenkneeshio, published on GitHub. It is a 2-layer board measuring 35.4 × 19.6 mm, with 5 components from 5 distinct parts.

By type, the board carries 3 resistors and 2 connectors.

It belongs with the robotics & motion designs in this gallery.

From the project

This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub

Currently the GitHub Repo ignores .zip and .raw to save space

RGB bill of materials (BOM)

5 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RGB LED
J2
1
Conn_01x04_Pin
J3
1
150 Blue
R4
1
100 RED
R5
1
AR03BTCX1503
150 Green
R6

RGB design files

The KiCad project lives in the Kenkneeshio/SeniorDesign-Team9 repository on GitHub; these links point at the commit this page was built from.

RGB: common questions

How big is the RGB PCB?

The RGB measures 35.4 × 19.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RGB?

5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RGB design files?

From the Kenkneeshio/SeniorDesign-Team9 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RGB design in my own project?

The repository has no license, so all rights stay with Kenkneeshio. Use it as a reference, and ask the author before reusing the design.

More boards in SeniorDesign-Team9

Similar boards