HardLabs

Mcu singleside

Kenkneeshio·SeniorDesign-Team9·KiCad/MCU2_SingleSide/mcu_singleside/mcu_singleside.kicad_pcb

Mcu singleside PCB layout, top view — open source AVR/Arduino board by Kenkneeshio

About the Mcu singleside PCB

Mcu singleside is an open source AVR/Arduino PCB design by Kenkneeshio, published on GitHub. It is a 2-layer board measuring 49.4 × 39.7 mm, with 22 components from 19 distinct parts.

Its main chip is the ATmega328P-A, from the AVR/Arduino family. Other key parts include the AMS1117 and ADR02AUJZ-REEL7. By type, the board carries 9 connectors, 5 capacitors, 3 ICs, 2 resistors, 1 crystal and 1 switch.

It belongs with the robotics & motion designs in this gallery.

From the project

This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub

Currently the GitHub Repo ignores .zip and .raw to save space

Main components on the Mcu singleside

ATmega328P-AAMS1117ADR02AUJZ-REEL7

Mcu singleside bill of materials (BOM)

22 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATmega328P-A
U1
1
AMS1117
U2
1
ADR02AUJZ-REEL7
U3
1
Crystal
Y1
1
Conn_02x03_Counter_Clockwise
J1
1
Conn_01x06
J2
2
Conn_01x03
J3, J7
1
Conn_01x02_Pin
J4
1
XT30
J5
1
AandDpin
J6
1
Conn_01x01_Pin
J8
1
Conn_01x04_Pin
J9
1
TL3305AF160QG
MCU_Button
SW1
1
B0540W-7-F
MCU_LED
D1
1
CC0603JRX7R9BB104
100nF
C1
2
CC0603JRX7R9BB104
0.1uf
C2, C3
2
0603N220F101CT
0.22pf
C4, C5
1
1k
R1
1
10K
R4

Mcu singleside design files

The KiCad project lives in the Kenkneeshio/SeniorDesign-Team9 repository on GitHub; these links point at the commit this page was built from.

Mcu singleside: common questions

What microcontroller does the Mcu singleside use?

The Mcu singleside is built around the ATmega328P-A, from the AVR/Arduino family.

How big is the Mcu singleside PCB?

The Mcu singleside measures 49.4 × 39.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mcu singleside?

22 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mcu singleside design files?

From the Kenkneeshio/SeniorDesign-Team9 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mcu singleside design in my own project?

The repository has no license, so all rights stay with Kenkneeshio. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mcu singleside without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in SeniorDesign-Team9

Similar boards