Spidr
kermitsgonnakermicide·spidrpcb
About the Spidr PCB
Spidr is an open source RP2040/RP2350 PCB design by kermitsgonnakermicide, published on GitHub. It is a 2-layer board measuring 101 × 67.3 mm, with 68 components from 35 distinct parts.
Its main chip is the RP2350_80QFN, from the RP2040/RP2350 family. Other key parts include the NCP1117-3.3_SOT223 and USBLC6-2P6. By type, the board carries 29 capacitors, 15 connectors, 10 resistors, 4 switches, 3 ICs and 3 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
This repository contains the KiCad work for a four-channel brushed motor controller. The proposed controller uses an RP2354B, four TI DRV8256P H-bridges, quadrature encoder inputs, USB-C device power, and a protected Feetech-style TTL serial-servo port.
This repository contains the KiCad work for a four-channel brushed motor controller. The proposed controller uses an RP2354B, four TI DRV8256P H-bridges, quadrature encoder inputs, USB-C device power, and a protected Feetech-style TTL serial-servo port.
The current KiCad sheets are still being edited. The design guide below is a reviewed target architecture, not a claim that the existing PCB already implements it.
Main components on the Spidr
Spidr bill of materials (BOM)
68 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2350_80QFN | RP2350-QFN-80-1EP_10x10_P0.4mm_EP3.4x3.4mm_ThermalVias | U2 |
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U3 |
| 1 | USBLC6-2P6 | SOT-666 | U4 |
| 1 | ABM8-272-T3 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | SM03B-SRSS-TB | JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J1 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_Molex_105450-0101 | J2 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 5 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J7, J8, J9, J10, J17 |
| 1 | SM04B-SRSS-TB_LF__SN_ | JST_SM04B-SRSS-TB_LF__SN_ | J11 |
| 4 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J12, J13, J14, J15 |
| 1 | Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J16 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J18 |
| 2 | SW_Push | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1, SW2 |
| 2 | KMR223G LFG SW_Push C&K | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW3, SW4 |
| 2 | TestPoint | TestPoint_Plated_Hole_D3.0mm | TP1, TP2 |
| 1 | 1N4728A | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 2 | LED | LED_1206_3216Metric | D2, D3 |
| 1 | 3.3u | L_pol_2016 | L2 |
| 2 | 4.7u | C_0402_1005Metric_small_pads | C1, C5 |
| 2 | 10u | C_0805_2012Metric | C2, C22 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100 nF | C_0402_1005Metric | C3, C12 |
| 1 | 1000 uF | CP_Radial_D10.0mm_P5.00mm | C4 |
| 2 | 10 uF | C_0805_2012Metric | C6, C13 |
| 2 | CL05B104KO5NNNC 100 uF Samsung Electro-Mechanics | CP_Radial_D5.0mm_P2.00mm | C7, C9 |
| 1 | CL05B104KO5NNNC 100 nF Samsung Electro-Mechanics | C_0402_1005Metric | C8 |
| 1 | GRT188R61C106KE13D 100 nF Murata Electronics | C_0402_1005Metric | C10 |
| 1 | 100 uF | CP_Radial_D5.0mm_P2.00mm | C11 |
| 11 | 100n | C_0402_1005Metric | C23, C26, C27, C28, C29, C30, C31, C32 +3 |
| 2 | 4.7u | C_0402_1005Metric | C24, C25 |
| 2 | 15p | C_0402_1005Metric | C36, C37 |
| 3 | 1k | R_0402_1005Metric | R1, R11, R14 |
| 2 | 10k | R_0805_2012Metric | R2, R3 |
| 1 | 33 | R_0402_1005Metric | R5 |
| 2 | 5.1k | R_0603_1608Metric | R9, R10 |
| 2 | 27 | R_0402_1005Metric | R12, R13 |
Spidr design files
The KiCad project lives in the kermitsgonnakermicide/spidrpcb repository on GitHub; these links point at the commit this page was built from.
Spidr: common questions
What microcontroller does the Spidr use?
The Spidr is built around the RP2350_80QFN, from the RP2040/RP2350 family.
How big is the Spidr PCB?
The Spidr measures 101 × 67.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Spidr?
68 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Spidr design files?
From the kermitsgonnakermicide/spidrpcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Spidr design in my own project?
The repository has no license, so all rights stay with kermitsgonnakermicide. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Spidr without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k