MVPGPSTracker
Kev1n8088·MVPGPSTracker
About the MVPGPSTracker PCB
MVPGPSTracker is an open source PCB design by Kev1n8088, published on GitHub. It is a 2-layer board measuring 20 × 38 mm, with 13 components from 12 distinct parts.
Other key parts include the MAX-M10S, XIAO-MG24-SMD, MS5607-02BA and WIOSX1262. By type, the board carries 4 ICs, 3 resistors, 2 connectors, 2 capacitors and 1 inductor.
It belongs with the rf & radio designs in this gallery.
From the project
Juno GPS Tracker Repo (Previously named Minimum Viable Product Tracker)
Main components on the MVPGPSTracker
MVPGPSTracker bill of materials (BOM)
13 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX-M10S | ublox_MAX | U1 |
| 1 | XIAO-MG24-SMD | XIAO-MG24-SMD | U2 |
| 1 | MS5607-02BA | LGA-8_3x5mm_P1.25mm | U6 |
| 1 | WIOSX1262 WioSX1262 | Wio-SX1262 | U8 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | UFL | U.FL_Molex_MCRF_73412-0110_Vertical | J5 |
| 1 | ANT-916-JJB-RA | XDCR_ANT-916-JJB-RA | E1 |
| 1 | LQG15HS47NJ02 | L_0402_1005Metric | FB2 |
| 1 | 0.1UF 0.1uF | C_0402_1005Metric | C6 |
| 1 | 10nF X7R | C_0402_1005Metric | C43 |
| 2 | 100K 100k | R_0402_1005Metric | R1, R2 |
| 1 | 10R 0.25W | R_0402_1005Metric | R54 |
MVPGPSTracker design files
The KiCad project lives in the Kev1n8088/MVPGPSTracker repository on GitHub; these links point at the commit this page was built from.
MVPGPSTracker: common questions
How big is the MVPGPSTracker PCB?
The MVPGPSTracker measures 20 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MVPGPSTracker?
13 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MVPGPSTracker design files?
From the Kev1n8088/MVPGPSTracker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MVPGPSTracker design in my own project?
The repository has no license, so all rights stay with Kev1n8088. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568