GigaHub
Keyaan-07·GigaHub·hardware/usb-hub.kicad_pcb
About the GigaHub PCB
GigaHub is an open source PCB design by Keyaan-07, published on GitHub under the MIT license. It is a 4-layer board measuring 61.4 × 45.8 mm, with 65 components from 17 distinct parts.
Other key parts include the TUSB8041, TPS2561, HD3S3220 and MCP1700X-330XXTT. By type, the board carries 27 capacitors, 23 resistors, 9 ICs, 5 connectors and 1 crystal.
It belongs with the usb & debug tools designs in this gallery.
From the project
I made this project just for fun and because i had some free time. I could've made USB 2.0 hub but this was a bit challenging thus i made this!!
I made this project just for fun and because i had some free time. I could've made USB 2.0 hub but this was a bit challenging thus i made this!!
To Assemble this PCB, first you need to be familiar with soldering. You take your bare PCB, apply solder paste on it(soldering iron and solder is not recommended because it involves pins under the surface, such as the USB-C receptacles). Then, you take a hotplate or a hot air gun and melt the solder appropriately. There are many tutorials online teaching it in a great way, go search there!

Main components on the GigaHub
GigaHub bill of materials (BOM)
65 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TUSB8041 | QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm_ThermalVias | U1 |
| 2 | TPS2561 | VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias | U2, U3 |
| 5 | HD3S3220 | Texas_RNH0030A_WQFN-30-1EP_2.5x4.5mm_P0.4mm_EP1.2x3.2mm | U4, U5, U7, U8, U9 |
| 1 | MCP1700X-330XXTT MCP1700x-330xxTT | SOT-23 | U6 |
| 1 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 5 | USB_C_Receptacle | USB_C_Receptacle_Molex_105450-0101 | J1, J2, J3, J4, J5 |
| 23 | 100N 100n | C_0402_1005Metric | C1, C2, C3, C4, C6, C7, C11, C14 +15 |
| 2 | 10U 10u | C_0603_1608Metric | C5, C8 |
| 2 | C_Small | C_0402_1005Metric | C12, C13 |
| 1 | 9.53K 9.53k | R_0402_1005Metric | R1 |
| 3 | 4.7K 4.7k | R_0402_1005Metric | R2, R3, R4 |
| 5 | 10K 10k | R_0402_1005Metric | R5, R10, R11, R12, R13 |
| 1 | 90.9K 90.9k | R_0402_1005Metric | R6 |
| 1 | 1M | R_0402_1005Metric | R7 |
| 2 | 30K 30k | R_0402_1005Metric | R8, R9 |
| 5 | 100K 100k | R_0402_1005Metric | R20, R21, R25, R27, R29 |
| 5 | 900K 900k | R_0402_1005Metric | R22, R23, R24, R26, R28 |
GigaHub design files
The KiCad project lives in the Keyaan-07/GigaHub repository on GitHub; these links point at the commit this page was built from.
GigaHub: common questions
How big is the GigaHub PCB?
The GigaHub measures 61.4 × 45.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the GigaHub?
65 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GigaHub design files?
From the Keyaan-07/GigaHub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GigaHub design in my own project?
Yes, under the terms of its MIT license, which Keyaan-07 chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389