PSU
Keyaan-07·PSU·hardware/psu-charger.kicad_pcb
About the PSU PCB
PSU is an open source PCB design by Keyaan-07, published on GitHub. It is a 2-layer board measuring 48 × 30 mm, with 16 components from 11 distinct parts.
Other key parts include the IP6518. By type, the board carries 9 capacitors, 2 connectors, 2 resistors, 1 IC, 1 fuse and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
A Portable PSU that can take input from any Litium based/Lead based battery and charge your devices.
Yes, this is a PSU. It has a USB-C output and a regular screw terminal block input. It contains the IP6518 from Injoinic Semiconductors, which is an all-in-one USB PD Source Controller. This PSU can be pretty helpful in emergency conditions. It can charge devices with a maximum power of 45W. It supports many protocols, including but not limited to USB-PD, QC, BC. A case has been designed around it to provide ruggeddness from the environment. To use it, just plug in two wires into the screw terminal, and connect a USB-C cable, and you're working with it.

Main components on the PSU
PSU bill of materials (BOM)
16 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IP6518 INJOINIC(英集芯) | QFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
| 1 | Fuse | Fuse_1206_3216Metric | F1 |
| 1 | 22U 22u | L_10.4x10.4_H4.8 | L1 |
| 1 | 100U 100u | CP_Elec_6.3x7.7 | C1 |
| 4 | 22U 22u | CP_Elec_5x5.4 | C2, C3, C8, C9 |
| 3 | 100N 100n | C_1206_3216Metric | C4, C5, C6 |
| 1 | 330U 330u | CP_Elec_10x10 | C7 |
| 1 | 47K 47k | R_1206_3216Metric | R1 |
| 1 | 20M 20m | R_2512_6332Metric | R2 |
PSU design files
The KiCad project lives in the Keyaan-07/PSU repository on GitHub; these links point at the commit this page was built from.
PSU: common questions
How big is the PSU PCB?
The PSU measures 48 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PSU?
16 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PSU design files?
From the Keyaan-07/PSU repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PSU design in my own project?
The repository has no license, so all rights stay with Keyaan-07. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k