EPozytywka
KhazAkar·ePozytywka
About the EPozytywka PCB
EPozytywka is an open source STM32 PCB design by KhazAkar, published on GitHub. It is a 2-layer board measuring 100 × 70 mm, with 42 components from 26 distinct parts.
Its main chip is the STM32F030K6TX, from the STM32 family. Other key parts include the DFPlayer_Mini, MCP73871-1CC and AP1117-33. By type, the board carries 16 capacitors, 12 resistors, 5 connectors, 4 ICs, 1 crystal and 1 battery holder.
From the project
[MOVED to GitLab: https://gitlab.com//r3xxar/ePozytywka]
Main components on the EPozytywka
EPozytywka bill of materials (BOM)
42 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030K6TX STM32F030K6Tx | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | DFPlayer_Mini | DFPlayer_Mini | U2 |
| 1 | MCP73871-1CC | QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U3 |
| 1 | AP1117-33 | SOT-223-3_TabPin2 | U4 |
| 1 | 8M | Crystal_SMD_TXC_7A-2Pin_5x3.2mm | Y1 |
| 1 | Touch LCD | PinHeader_1x14_P2.54mm_Vertical | J1 |
| 1 | Lid Switch | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | SWD | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | ~RESET | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | USB_B_Micro | AMPHENOL_10118192-0001LF | J5 |
| 1 | Li-Ion | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | YD78 | PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | 10K 10k | PinHeader_1x02_P2.54mm_Vertical | TH1 |
| 1 | BLM21PG221SH1D | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 2 | 20P 20p | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
| 4 | 4U7 4u7 | CP_Elec_4x5.3 | C3, C6, C13, C14 |
| 4 | 220N 220n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C7, C10, C12 |
| 4 | 22N 22n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5, C8, C15, C16 |
| 1 | 100N 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C9 |
| 1 | 22U 22u | CP_Elec_4x5.3 | C11 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 270R 270 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 1 | 220K 220k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 560K 560k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 4 | 10K 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R10, R11, R12 |
| 3 | 20K 20k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7, R9 |
| 1 | 1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
EPozytywka design files
The KiCad project lives in the KhazAkar/ePozytywka repository on GitHub; these links point at the commit this page was built from.
- LayoutePozytywka.kicad_pcb
- BOMBOM.xls
EPozytywka: common questions
What microcontroller does the EPozytywka use?
The EPozytywka is built around the STM32F030K6TX, from the STM32 family.
How big is the EPozytywka PCB?
The EPozytywka measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EPozytywka?
42 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EPozytywka design files?
From the KhazAkar/ePozytywka repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the EPozytywka design in my own project?
The repository has no license, so all rights stay with KhazAkar. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the EPozytywka without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k