8 open source boards using the DFPlayer_Mini

Real designs built with the DFPlayer_Mini, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the DFPlayer_Mini

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the DFPlayer_Mini connects to, and the resistors, capacitors and other passives placed on it.

  • The DAC_R pin is left unconnected on 7 of 8 designs.
  • The DAC_L pin is left unconnected on 7 of 8 designs.
  • The ADKEY_1 pin is left unconnected on 7 of 7 designs.
  • The ADKEY_2 pin is left unconnected on 7 of 7 designs.
VCCpin 1Connected to: 5V 100%
  • Decoupling capacitor on 50% · 100 nF (2), 220 nF (1), 10 µF (1)
RXpin 2Connected to: The microcontroller 38%, WeMos_mini 25%
  • Series resistor on 38% · 1 kΩ (3)
DAC_Rpin 4Connected to: Not connected 88%
DAC_Lpin 5Connected to: Not connected 88%
GNDpin 7, 10Connected to: GND 93%
IO_1pin 9Connected to: Not connected 86%
IO_2pin 11Connected to: Not connected 86%
ADKEY_1pin 12Connected to: Not connected 100%
ADKEY_2pin 13Connected to: Not connected 100%
USB+pin 14Connected to: Not connected 100%
USB-pin 15Connected to: Not connected 100%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RetroWiFiModem by mecparts, AWTRIX-Motherboard by Final-Resolution, Mario Kart by Wyphorn and Advanced-RetroWiFiModem by oe3gwu.

The DFPlayer_Mini in open source designs

The gallery holds 8 open source boards using the DFPlayer_Mini from 8 GitHub repositories; a typical one measures about 100 × 68.1 mm and carries around 36 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is RetroWiFiModem by mecparts.

Microcontrollers on boards using the DFPlayer_Mini

DFPlayer_Mini: common questions

Where can I find a DFPlayer_Mini reference design?

Each of the 8 boards on this page is a real design using the DFPlayer_Mini. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the DFPlayer_Mini DAC_R pin connected?

The DAC_R pin is left unconnected on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the DFPlayer_Mini.

How is the DFPlayer_Mini DAC_L pin connected?

The DAC_L pin is left unconnected on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the DFPlayer_Mini.

How is the DFPlayer_Mini ADKEY_1 pin connected?

The ADKEY_1 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 8 open source designs using the DFPlayer_Mini.

What parts are used alongside the DFPlayer_Mini?

The 74HCT245D, L4931CZ33-AP, MAX3237ECDWR, SN74HC32DR and WeMos_mini appear in the most repositories here.

Which microcontrollers do boards using the DFPlayer_Mini use?

Most are built on ESP32 (3), ESP8266 (3), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the DFPlayer_Mini?

The median is 100 × 68.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the DFPlayer_Mini?

By GitHub stars, RetroWiFiModem by mecparts, with 259 stars.

Can I simulate one of these boards using the DFPlayer_Mini before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part