BatteryGaulgue
About the BatteryGaulgue PCB
BatteryGaulgue is an open source PCB design by Killerbee12, published on GitHub. It is a 2-layer board measuring 68.5 × 38 mm, with 28 components from 17 distinct parts.
Other key parts include the BQ34Z100PW-G1. By type, the board carries 10 connectors, 7 resistors, 6 capacitors, 1 IC, 1 transistor and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
Proyecto final de grado
Trabajo Fin de Grado — Grado en Ingeniería Electrónica de Comunicaciones ETSIST · Universidad Politécnica de Madrid (UPM)
Cualquiera que haya hecho astrofotografía o astronomía visual en campo abierto sabe que la energía es un problema. Las monturas motorizadas, las cámaras y los accesorios necesitan alimentación estable durante horas, normalmente lejos de cualquier enchufe. La solución clásica es cargar con una batería de plomo-ácido, que pesa, ocupa y no te dice cuánta carga le queda realmente.
Main components on the BatteryGaulgue
BatteryGaulgue bill of materials (BOM)
28 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ34Z100PW-G1 | SOP65P640X120-14N | U1 |
| 1 | BC547 | TO-92_Inline | Q1 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J1, J3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2, J7 |
| 5 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J4, J5, J6, J9, J10 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | 0.010 | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | Rshunt1 |
| 1 | Thermistor_NTC | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | TH1 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 4 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C5 |
| 1 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 3300pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 2 | 100 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 1 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 16.5k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 250k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 2 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8 |
BatteryGaulgue design files
The KiCad project lives in the Killerbee12/TFG-UPM repository on GitHub; these links point at the commit this page was built from.
BatteryGaulgue: common questions
How big is the BatteryGaulgue PCB?
The BatteryGaulgue measures 68.5 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BatteryGaulgue?
28 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the BatteryGaulgue design files?
From the Killerbee12/TFG-UPM repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BatteryGaulgue design in my own project?
The repository has no license, so all rights stay with Killerbee12. Use it as a reference, and ask the author before reusing the design.
More boards in TFG-UPM
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k