HardLabs

MCU Embedded

kinsy3015·Circuit_Design·PCB_Design/Kicad_Workspace/MCU Embedded PCB_STM2/PIC16LF1786/MCU Embedded PCB.kicad_pcb

MCU Embedded
Simulate this board

About the MCU Embedded PCB

MCU Embedded is an open source PIC PCB design by kinsy3015, published on GitHub. It is a 2-layer board, with 6 components from 4 distinct parts.

Its main chip is the LM555XN, from the PIC family. By type, the board carries 5 connectors and 1 IC.

Main components on the MCU Embedded

LM555XN

MCU Embedded bill of materials (BOM)

6 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM555XN
PIC16LF1786-xP
U1
1
SCREW_TERMINAL_01X02
Conn_01x08
J1
3
Conn_01x08
J2, J3, J4
1
Conn_01x04
J5

MCU Embedded design files

The KiCad project lives in the kinsy3015/Circuit_Design repository on GitHub; these links point at the commit this page was built from.

MCU Embedded: common questions

What microcontroller does the MCU Embedded use?

The MCU Embedded is built around the LM555XN, from the PIC family.

How big is the MCU Embedded PCB?

The MCU Embedded has 2 copper layers and is 1.6 mm thick.

How many components are on the MCU Embedded?

6 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MCU Embedded design files?

From the kinsy3015/Circuit_Design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MCU Embedded design in my own project?

The repository has no license, so all rights stay with kinsy3015. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MCU Embedded without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in Circuit_Design

Similar boards