HardLabs

Pcb s0-raspberrypi hat

klein0r·pcb-s0-raspberrypi-hat

Pcb s0-raspberrypi hat layout, top view — open source Raspberry Pi board by klein0r
Simulate this board

About the Pcb s0-raspberrypi hat

Pcb s0-raspberrypi hat is an open source Raspberry Pi PCB design by klein0r, published on GitHub under the MIT license. It is a 2-layer board measuring 29.1 × 25.5 mm, with 7 components from 6 distinct parts.

Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. By type, the board carries 4 resistors and 3 connectors.

It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.

From the project

PCB for S0 energy meter as a raspberry pi hat

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

Pcb s0-raspberrypi hat, from the project README
From the project README

Pcb s0-raspberrypi hat bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
Raspberry_Pi_2_3
J1
1
Screw_Terminal_01x02
J2
1
Conn_01x03_Male
J3
2
2,2kΩ
R1, R2
1
1kΩ
R3
1
100Ω
R4

Pcb s0-raspberrypi hat design files

The KiCad project lives in the klein0r/pcb-s0-raspberrypi-hat repository on GitHub; these links point at the commit this page was built from.

Pcb s0-raspberrypi hat: common questions

What microcontroller does the Pcb s0-raspberrypi hat use?

The Pcb s0-raspberrypi hat is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.

How big is the Pcb s0-raspberrypi hat?

The Pcb s0-raspberrypi hat measures 29.1 × 25.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb s0-raspberrypi hat?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb s0-raspberrypi hat design files?

From the klein0r/pcb-s0-raspberrypi-hat repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Pcb s0-raspberrypi hat design in my own project?

Yes, under the terms of its MIT license, which klein0r chose for the repository.

Can I test firmware for the Pcb s0-raspberrypi hat without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards