HardLabs

Pico2-artnet node

klnspdr·pico2-artnet-node

Pico2-artnet node PCB layout, top view — open source RP2040/RP2350 board by klnspdr

About the Pico2-artnet node PCB

Pico2-artnet node is an open source RP2040/RP2350 PCB design by klnspdr, published on GitHub. It is a 2-layer board measuring 84.6 × 157.4 mm, with 81 components from 35 distinct parts.

Its main chip is the W5500-EVB-PICO2, from the RP2040/RP2350 family. Other key parts include the B0505S-2WR3 and ISO1410BDWR. By type, the board carries 30 capacitors, 25 resistors, 10 diodes, 9 connectors and 7 ICs.

From the project

PCB + SMD Components: 8.146$ / board Missing Components: - 4x XLR Connectors (~1.40€ / piece) - 1x WizNet W5500-EVB-PICO2 (~12€ / piece) - 1x B0505S (~1.05$ / piece) - 1x WIZPoE Module (~8€ / piece) - 2x 1x20 2.54mm Pinsocket THT Vertical (~0.15$ / piece) - 3x 1x4 2.54mm Pinsocke

PCB + SMD Components: 8.146$ / board Missing Components: - 4x XLR Connectors (~1.40€ / piece) - 1x WizNet W5500-EVB-PICO2 (~12€ / piece) - 1x B0505S (~1.05$ / piece) - 1x WIZPoE Module (~8€ / piece) - 2x 1x20 2.54mm Pinsocket THT Vertical (~0.15$ / piece) - 3x 1x4 2.54mm Pinsocket THT Vertical (~0.05$ / piece)

=> Overall cost per board (without shipping): ~20€ / ~28€ (without/with PoE)

Main components on the Pico2-artnet node

W5500-EVB-PICO2B0505S-2WR3ISO1410BDWR

Pico2-artnet node bill of materials (BOM)

81 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
W5500-EVB-PICO2
U2
1
B0505S-2WR3
U4
1
ISO1410BDWR
SN74LVC4245APWR
U5
3
ISO1410BDWR
U6, U7, U8
1
ISO1410BDWR
U9
1
USB_C_RECEPTACLE_POWERONLY_6P
USB_C_Receptacle_PowerOnly_6P
J1
1
Conn_01x04_Pin
J2
1
I2C Header
J3
1
Conn_01x02_Pin
J4
1
Conn_01x16_Pin
J5
4
NC3FAAH
J6, J7, J8, J9
1
B0520WS
LED
D1
1
B0520WS
D2
4
C84256
YELLOW
D5, D7, D9, D11
3
C2296
RED
D6, D8, D10
1
RED
D12
6
10U
10u
C1, C4, C5, C11, C17, C20
2
100U
100u
C2, C3
1
0.1U
100u
C6
3
0.1U
10u
C7, C10, C13
Show 15 more
QtyPartRefs
2
10U
0.1u
C8, C14
6
0.1U
0.1u
C9, C12, C15, C16, C18, C19
4
0.1u
C21, C22, C24, C25
4
10u
C23, C26, C28, C29
2
100u
C27, C30
2
5.1K
5.1k
R1, R2
1
82
R3
1
510R
4.7k
R4
1
120R
4.7k
R5
4
510R
56
R6, R11, R16, R21
5
510R
R7, R12, R17, R22, R24
4
120R
R8, R13, R18, R23
3
510R
R9, R14, R19
3
120R
56
R10, R15, R20
1
56
R25

Pico2-artnet node design files

The KiCad project lives in the klnspdr/pico2-artnet-node repository on GitHub; these links point at the commit this page was built from.

Pico2-artnet node: common questions

What microcontroller does the Pico2-artnet node use?

The Pico2-artnet node is built around the W5500-EVB-PICO2, from the RP2040/RP2350 family.

How big is the Pico2-artnet node PCB?

The Pico2-artnet node measures 84.6 × 157.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pico2-artnet node?

81 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pico2-artnet node design files?

From the klnspdr/pico2-artnet-node repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pico2-artnet node design in my own project?

The repository has no license, so all rights stay with klnspdr. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pico2-artnet node without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards