3 open source boards using the B0505S-2WR3
Real designs built with the B0505S-2WR3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Geiger Counter
perpuchaty
85 × 75 mm125 parts2LNo license0RP2040/RP2350
Pico2-artnet node
klnspdr
84.6 × 157.4 mm81 parts2LNo license0Canjay
atopile
122 × 100 mm152 parts6LMIT29
The B0505S-2WR3 in open source designs
The gallery holds 3 open source boards using the B0505S-2WR3 from 3 GitHub repositories; a typical one measures about 85 × 100 mm and carries around 125 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Canjay by atopile.
Microcontrollers on boards using the B0505S-2WR3
What boards using the B0505S-2WR3 are built for
B0505S-2WR3: common questions
Where can I find a B0505S-2WR3 reference design?
Each of the 3 boards on this page is a real design using the B0505S-2WR3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the B0505S-2WR3 use?
Most are built on ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the B0505S-2WR3?
The median is 85 × 100 mm, and 67% are two-layer designs.
What is the most popular open source board using the B0505S-2WR3?
By GitHub stars, Canjay by atopile, with 29 stars.
Can I simulate one of these boards using the B0505S-2WR3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.