Subwoofer Amplifier circuit design with pcb kg
About the Subwoofer Amplifier circuit design with pcb kg
Subwoofer Amplifier circuit design with pcb kg is an open source PCB design by kogeicollins, published on GitHub. It is a 2-layer board, with 19 components from 17 distinct parts.
By type, the board carries 6 capacitors, 4 connectors, 3 diodes, 2 resistors, 1 switch and 1 transformer.
It belongs with the audio designs in this gallery.
From the project
circuit and pcb of a subwoofer amplifier
Subwoofer Amplifier circuit design with pcb kg bill of materials (BOM)
19 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Screw_Terminal_01x02 | JST_JWPF_B02B-JWPF-SK-R_1x02_P2.00mm_Vertical | J1, J2 |
| 1 | AudioJack2_Ground | Jack_3.5mm_CUI_SJ1-3533NG_Horizontal | J3 |
| 1 | Jack-DC | BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J4 |
| 1 | TDA7377 | AMP_TDA7377 | AMP1 |
| 1 | 10K | Potentiometer_Bourns_3214X_Vertical | RV1 |
| 1 | SW_MEC_5G | SW_MEC_5GSH9 | SW1 |
| 1 | 12V | Transformer_Toroid_Horizontal_D10.5mm_Amidon-T37 | T1 |
| 1 | D_Bridge_+-AA | Diode_Bridge_Bourns_CD-DF4xxS | D1 |
| 1 | 1N914 | D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | LED | LED_D3.0mm_Horizontal_O3.81mm_Z6.0mm | D3 |
| 1 | 50nF | C_Rect_L9.0mm_W3.9mm_P7.50mm_MKT | C1 |
| 1 | 10nF | CP_Elec_6.3x4.5 | C2 |
| 1 | 50nF | CP_Elec_6.3x4.5 | C3 |
| 1 | 47nF | CP_Elec_6.3x4.5 | C4 |
| 1 | 10nF | C_Rect_L9.0mm_W3.9mm_P7.50mm_MKT | C5 |
| 1 | 1000uF | CP_Elec_6.3x5.4 | C6 |
| 2 | 10K | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R2 |
Subwoofer Amplifier circuit design with pcb kg design files
The KiCad project lives in the kogeicollins/subwoofer_Amplifier_circuit_design_with_pcb_kg repository on GitHub; these links point at the commit this page was built from.
- LayoutAltamplifier.kicad_pcb
- SchematicAltamplifier.kicad_sch
Subwoofer Amplifier circuit design with pcb kg: common questions
How big is the Subwoofer Amplifier circuit design with pcb kg?
The Subwoofer Amplifier circuit design with pcb kg has 2 copper layers and is 1.6 mm thick.
How many components are on the Subwoofer Amplifier circuit design with pcb kg?
19 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Subwoofer Amplifier circuit design with pcb kg design files?
From the kogeicollins/subwoofer_Amplifier_circuit_design_with_pcb_kg repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Subwoofer Amplifier circuit design with pcb kg design in my own project?
The repository has no license, so all rights stay with kogeicollins. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687