Amplifier
kolmeto1sta3-akk·amplifier-pcb
About the Amplifier PCB
Amplifier is an open source PCB design by kolmeto1sta3-akk, published on GitHub. It is a 2-layer board measuring 50 × 35 mm, with 24 components from 10 distinct parts.
By type, the board carries 9 capacitors and 9 resistors.
It belongs with the audio designs in this gallery.
From the project
Плата — инструментальный усилитель на трёх операционных усилителях:
Плата — инструментальный усилитель на трёх операционных усилителях:
K = (1 + 2·R4 / R3) · (R8 / R6) = (1 + 2·2,2 кОм / 270 Ом) · 1 ≈ 17,3
LT1222 устойчив при шумовом усилении ≥ 10; в первом каскаде оно ≈ 17,3.
Входной фильтр: - дифференциальная полоса: f = 1 / (2π · 2R1 · (C2 + C1/2)) ≈ 1,0 кГц - синфазная полоса: f = 1 / (2π · R1 · C1) ≈ 21 кГц - C2 ≥ 10·C1 — разбаланс C1/C3 слабо влияет на подавление синфазного сигнала.

Amplifier bill of materials (BOM)
24 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LT1222CS8#PBF LT1222CS8 | SOIC-8_3.9x4.9mm_P1.27mm | DA1, DA2 |
| 1 | LT6202CS5#TRMPBF LT6202CS5 | SOT-23-5 | DA3 |
| 2 | A1251WR-S-2P | Molex_PicoBlade_53048-0210_1x02_P1.25mm_Horizontal | XT1, XT3 |
| 1 | A1251WR-S-3P | Molex_PicoBlade_53048-0310_1x03_P1.25mm_Horizontal | XT2 |
| 2 | CL21B123KBANNNC 0,012мк | C_0805_2012Metric | C1, C3 |
| 1 | C0805C124K1RACTU 0,12мк | C_0805_2012Metric | C2 |
| 6 | CL21B104KBFNNNE 0,1мк | C_0805_2012Metric | C4, C5, C6, C7, C8, C9 |
| 2 | RC0805FR-07620RL 620 | R_0805_2012Metric | R1, R2 |
| 1 | RC0805FR-07270RL 270 | R_0805_2012Metric | R3 |
| 6 | RC0805FR-072K2L 2,2к | R_0805_2012Metric | R4, R5, R6, R7, R8, R9 |
Amplifier design files
The KiCad project lives in the kolmeto1sta3-akk/amplifier-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutamplifier.kicad_pcb
- Schematicamplifier.kicad_sch
Amplifier: common questions
How big is the Amplifier PCB?
The Amplifier measures 50 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Amplifier?
24 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Amplifier design files?
From the kolmeto1sta3-akk/amplifier-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Amplifier design in my own project?
The repository has no license, so all rights stay with kolmeto1sta3-akk. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687