Class-D-Amplifier
komal250411·Class-D-Amplifier
About the Class-D-Amplifier PCB
Class-D-Amplifier is an open source PCB design by komal250411, published on GitHub. It is a 2-layer board measuring 36.5 × 29 mm, with 8 components from 8 distinct parts.
Other key parts include the ADA4898-2. By type, the board carries 2 transistors, 2 battery holders, 1 IC, 1 inductor, 1 capacitor and 1 resistor.
It belongs with the audio designs in this gallery.
From the project
A high-efficiency Class D Audio Amplifier design created in KiCad with a focused output filter and optimized power traces.
Main components on the Class-D-Amplifier
Class-D-Amplifier bill of materials (BOM)
8 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADA4898-2 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.81mm | U1 |
| 1 | Q_NMOS_DGS | TO-220-3_Vertical | Q1 |
| 1 | Q_PMOS_DGS | TO-220-3_Vertical | Q2 |
| 1 | 12V2 12v2 | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | 12V1 12v1 | PinHeader_1x02_P2.54mm_Vertical | BT2 |
| 1 | 22UH 1uh | L_Toroid_Vertical_L16.0mm_W8.0mm_P7.62mm | L1 |
| 1 | 1UF1 1uf1 | C_Rect_L7.2mm_W3.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1 |
| 1 | 8K1 8k1 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
Class-D-Amplifier design files
The KiCad project lives in the komal250411/Class-D-Amplifier repository on GitHub; these links point at the commit this page was built from.
- LayoutClass D.kicad_pcb
- SchematicClass D.kicad_sch
- BOMClass D.csv
Class-D-Amplifier: common questions
How big is the Class-D-Amplifier PCB?
The Class-D-Amplifier measures 36.5 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Class-D-Amplifier?
8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Class-D-Amplifier design files?
From the komal250411/Class-D-Amplifier repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Class-D-Amplifier design in my own project?
The repository has no license, so all rights stay with komal250411. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687