POE MODULE
Kozucjusz·POE_MODULE
About the POE MODULE
POE MODULE is an open source PCB design by Kozucjusz, published on GitHub. It is a 4-layer board measuring 66.6 × 36 mm, with 43 components from 22 distinct parts.
Other key parts include the LT4321, LT4320xMSE and LT4275. By type, the board carries 15 resistors, 14 transformers, 6 capacitors, 3 ICs and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
A 100-W Power over Ethernet (PoE) module for device power supply and Ethernet data transmission.
The AUX section allows the module to be powered either from an external DC voltage source or from mains voltage after prior step-down conversion. This solution increases application flexibility and enables the module to be used in systems requiring high power-supply reliability. In cases of space constraints, the AUX section can be mechanically separated—the corresponding part of the PCB may be broken off before component assembly without affecting the correct operation of the PoE section.

Main components on the POE MODULE
POE MODULE bill of materials (BOM)
43 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT4321 | QFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm_ThermalVias | U1 |
| 1 | LT4320xMSE | MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm_ThermalVias | U2 |
| 1 | LT4275 | MSOP-10-1EP_3x3mm_P0.5mm_EP2.2x3.1mm_Mask1.83x1.89mm_ThermalVias | U3 |
| 1 | 690368171672 Wurth Elektronik | J_Wurth_WR-MM_690368171672 | J1 |
| 1 | STPS1H100U | D_SMB_Handsoldering | DS1 |
| 1 | 1A | RLC_2512_6432Metric | FUSE1 |
| 1 | 7499511420 Wurth Elektronik | T_Wurth_WE-RJ45LAN_7499511420 | T1 |
| 13 | PSMN040-100MSE | LFPAK33 | T2, T3, T4, T5, T6, T7, T8, T9 +5 |
| 2 | 824500581 | D_SMA_Handsoldering | TVS1, TVS2 |
| 1 | 1nF | RLC_0603_1608Metric | C1 |
| 2 | 100nF | RLC_1206_3216Metric | C2, C3 |
| 3 | 1uF | RLC_1206_3216Metric | C4, C5, C6 |
| 2 | 10K | RLC_0603_1608Metric | R1, R2 |
| 2 | 330R | RLC_0603_1608Metric | R3, R4 |
| 4 | 75R | RLC_0603_1608Metric | R5, R6, R7, R8 |
| 1 | 30K | RLC_1206_3216Metric | R9 |
| 1 | 15K | RLC_1206_3216Metric | R10 |
| 1 | 49R9 | RLC_1206_3216Metric | R11 |
| 1 | 118R | RLC_1206_3216Metric | R12 |
| 1 | 8R2 | RLC_1206_3216Metric | R13 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3K3 | RLC_1206_3216Metric | R14 |
| 1 | 0R | RLC_1206_3216Metric | R15 |
POE MODULE design files
The KiCad project lives in the Kozucjusz/POE_MODULE repository on GitHub; these links point at the commit this page was built from.
- LayoutPOE_MODULE.kicad_pcb
- SchematicPOE_MODULE.kicad_sch
POE MODULE: common questions
How big is the POE MODULE?
The POE MODULE measures 66.6 × 36 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the POE MODULE?
43 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the POE MODULE design files?
From the Kozucjusz/POE_MODULE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the POE MODULE design in my own project?
The repository has no license, so all rights stay with Kozucjusz. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k